HP Z600 Maintenance And Service Manual page 52

Table 4-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading
HP Z800 Workstation PCI slots
HP Z600 PCI slots
40 Chapter 4 System management
Option Description
Chipset/ Enable/disable these options:
Memory
●
PCI SERR# Generation (Enable or Disable)—Controls PCI SERR# generation for ill-behaved
PCI add-in cards (that can generate SERR# spuriously).
●
PCI VGA Palette Snooping (Enable or Disable)—Controls PCI VGA Palette Snooping for
compatibility purposes.
●
Memory Mode Interleave—Sets interleave mode for dual socket workstations.
● NUMA Split Mode (Enable or Disable)—Provides enhanced memory performance by
increasing memory operation speed. Enable this option for Windows, and disable it for Linux.
(This option is not available on all workstations or configurations.)
● Enhanced Memory Performance (Enable or Disable)—Runs DIMMs at a higher frequency on
certain configurations and platforms.
Device Options Enables you to set the following device options:
●
Num Lock State at Power-On (On or Off)
● S5 Wake-on-LAN (Enable or Disable)
● Multiprocessor (Activates a single core.)
● Unique Sleep State Blink Rates (Enable or Disable)
●
Internal speaker
●
Monitor Tracking (Enable or Disable)
●
NIC PXE Option ROM
●
SAS Option ROM
●
SATA RAID Option ROM
Slot 1 - PCIe2 x8 Slot 1 option ROM download (Enable or Disable)
(4)
Slot 2 - PCIe2 Slot 2 option ROM download (Enable or Disable)
x16
Slot 3 - PCIe x8 Slot 3 option ROM download (Enable or Disable)
(4)
Slot 4 - PCIe2 Slot 4 option ROM download (Enable or Disable)
x16(8)
Slot 5 - PCIe2 Slot 5 option ROM download (Enable or Disable)
x16
Slot 6 - PCI Slot 6 option ROM download (Enable or Disable), and latency timer and speed
32/33
Slot 7 - PCIe2 Slot 7 option ROM download (Enable or Disable), and latency timer and speed
x16(8)
1 Download (Enable or Disable)
1 Download (Enable or Disable) (Not available on some workstations.)
1 Download (Enable or Disable)
ENWW