SOLTEK SL-85DRV User Manual page 98

Series SL-85DRV
4. Using the Spacebar, choose "Security" under the "Optimize Array
for " section.
5. Press <Ctrl-Y> keys to save and create the array.
6. The window below will appear:
Do you want the disk image to be duplicated to anther? (Yes/No)
Y - Create and Duplicate
N - Create Only
7. Press "N" for the Create Only option.
8. A window will appear almost immediately confirming that your Security
array has been created. Press any key to reboot the system.
9. Proceed with normal FDISK and format procedures as if you had just
installed a new hard drive.
10. Once the arrayed drives have been formatted, proceed to Section 5-3
"Installing Driver" to install your operating system and FastTrak100-
Lite driver.
Array has been created.
<Press Any key to Reboot>
98