SOLTEK SL-85DRV User Manual page 101

6. Press "Y" for the "Create and Duplicate" option. The window below
will appear asking you to select the Source drive to use.
Channel: ID
Channel: ID
Channel: ID
1 : Master
2 : Master
7. Use the arrow keys to choose which drive contains the existing data to
be copied. FastBuild will copy all data from the Source drive to the
Target drive.
8. Press [Ctrl-Y] keys to save selection and start duplication. The following
progress screen will appear:
9. Select "Y" to continue. If you choose "N", you will return to step 4.
10. Once complete, the following screen will appear confirming that
your Security array has been created. Press any key to reboot the
system.
11. Proceed to Section 5-3 Installing Driver to install the FastT rak100-Lite
driver and/or operating system.
Source Disk
Drive Model
Target Disk
Drive Model
[Please Select A Source Disk]
Drive Model
QUANTUMCR8.4A
QUANTUMCR8.4A
[ ] Up [ ] [ESC] Exit [Ctrl-Y] Save
Start to duplicate the image .....
Do you want to continue? (Yes/No)
Y - Continue N - Create Only
Array has been created.
<Press Any key to Reboot>
101
Chapter 5 RAID Controller
Capacity (MB)
Capacity(MB)
Capacity (MB)
8063
8063