IMO VXSM75-1 Instruction Manual page 103

(2)Functions for standard frame (monitor data)
Name Command
type
character
Frequency R
(Final value)
Frequency R
command value
Calculated torque R
value
Torque current R
Output frequency R
Motor output R
(power
consumption)
Output current R
Output voltage R
Operation R
command
Operation status R
General purpose R
output terminal
Table 9-4-6 Standard frame (monitor data)
9-21
Function type Data and operation
character and
number
M01 ±20000d/fmax (Max. frequency)
M05 100=1.00Hz (Value multiplied by 100)
The current frequency setting is returned.
M07 100% (rated torque) / ± 10000 (value multiplied
by 100)
M08 100% (rated current) / ± 10000
(value multiplied by 100)
M09 100=1.00Hz
(Value multiplied by 100; special additional data: sign)
The current output frequency is returned.
M10 100% (rated output) / ± 10000
(value multiplied by 100)
M11 100 = 1% of rated inverter current
The current output current is returned in the ratio to
the rated current.
M12 10=1V
M13 bit15:RESET 1:ON,0:OFF
bits 14 to 5: Fixed to 0
bit6:X5 1:ON, 0:OFF
bit5:X4 1:ON, 0:OFF
bit4:X3 1:ON, 0:OFF
bit3:X2 1:ON, 0:OFF
bit2:X1 1:ON, 0:OFF
bit 1: REV (reverse rotation command)
1:ON,0:OFF
bit 0: FWD (forward rotation command)
1:ON,0:OFF
The final command value including the state of the
actual control terminal of the inverter is returned.
M14 bit 15: Function code data being written
bit 12: 1: Communication valid
bit 11: 1: Batch failure (tripping)
bit 10: 1: During deceleration
bit 9: 1: During acceleration
bit 8: 1: Current limit operation
bit 7: 1: Voltage limit operation
bit 6: 1: Torque limit operation
bit 5: 1: DC link voltage established
bit 4: 1: During braking
bit 3: 1: During output shutoff
bit 2: 1: During DC braking
bit 1: 1: During reverse rotation
bit 0: 1: During forward rotation
M15 bit 1: Y2; active upon "1"
bit 0: Y1; active upon "1"
Specifications