Percent Surcharge And Discount; Percent Surcharge - ELCOM Euro-200T User Manual

Operation in registration mode
• voidance of receipt (subtotal voidance)
Example: Void the whole receipt. Subtotal voidance is used for total voidance of a sale. It can be used only

before pressing the
Step
1.
2.
3.
4.
5.
6.

PERCENT SURCHARGE AND DISCOUNT

The system permits programming of a percent value that is used for a surcharge

and limits for manual entry. If you need to register a different rate than the one pre-programmed,
enter the numeric value of the surcharge or of the discount before pressing the relevant key. The value of
the new rate will be effective only for one registration.

Percent surcharge

Example 1: A five percent surcharge for special services is added. In the following example the
(Surcharge) key was programmed for five percent.
Step
1.
2.
If all items within a transaction have the same handling charge, the charge may be added at one time for the
whole transaction. When all items have been registered on which the surcharge is applied, press the
(S ) and then the
UBTOTAL
Example 2: Enter other than pre-programmed rate (10 %).
Entering the surcharge value from the keyboard is possible only if the value is lower than the pre-program-
med limit (see seventh system flag).
In the case of a linked PLU, the surcharge is applied to the first item only.
Step
1.
2.
60
(T ) key.
OTAL
Press






Press
 

ADD ON%+

(S ) key.
URCHARGE
Press
 
 
1.60
Department
1
1*31.20
Department
2
1*18.60 =18.60 [
Department
6
2*6.30 =12.60 [
SUBTOTAL
SUBTOTAL VOID =-62.40
***************************
SUBTOTAL VOID
***************************

Department 2
1*31.20 =31.20 [
ADD ON%+ 5.00%
Department 2
1*31.20 =31.20
ADD ON%+
=31.20 [
62.40
and for a discount

=1.60

[
10%
=3.10