Table of Contents
Advertisement
Operation in registration mode
PERCENT SURCHARGE AND DISCOUNT
The system permits programming of a percent value that is used for a surcharge
and limits for manual entry. If you need to register a different rate than the one pre-programmed,
enter the numeric value of the surcharge or of the discount before pressing the relevant key. The value of
the new rate will be effective only for one registration.
Percent surcharge
Example 1: A five percent surcharge for special services is added. In the following example the
(Surcharge) key was programmed for five percent.
Step
1.
2.
If all items within a transaction have the same handling charge, the charge may be added at one time for the
whole transaction. When all items have been registered on which the surcharge is applied, press the
(S
) and then the
UBTOTAL
Example 2: Enter other than pre-programmed rate (10 %).
Entering the surcharge value from the keyboard is possible only if the value is lower than the pre-program-
med limit (see seventh system flag).
In the case of a linked PLU, the surcharge is applied to the first item only.
Step
1.
2.
Percent discount
Example: Pensioners are provided with a 10% discount.
Step
1.
2.
If the same discount is to be deducted from all PLUs within the transaction, the discount for the whole trans-
action may be entered in one operation. When all items on which the discount is to be applied are registe-
56
Press
.
(S
) key.
URCHARGE
Press
Press
-
.
and for a discount
Department 2
1*31.20=31.20 [
ADD ON%+ 5.00%
=1.60
Department 2
[
1*31.20
=31.20
ADD ON%+
10%
=3.10
Department 2
1*31.20 =31.20 [
DISCOUNT%- 10%
=-3.10
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-100T and is the answer not in the manual?
Questions and answers
How to fix error f06