Table of Contents
Advertisement
5
0
Figure 3.12. Second extended flag values
Digit
Default setting
1
0
2
1
Figure 3.13. Third extended flag values
Digit
Default setting
1
1
TAX RATES PROGRAMMING
The cash register allows the use of six tax rates plus one rate without tax. Both the tax rate and its name are
programmable. The seventh rate is not programmable.
Tax level programming procedure:
1) Switch the ECR into the programming mode "P" by pressing
2) Press the
3) Enter the tax rate without decimal point. First two numerals compose integer part of the rate, last
two compose decimal part (i. e. for tax rate of 19% it is 1 9 0 0). The tax rate can be changed only
after daily and periodical report have been executed in "Z" report mode. If you need to disable
a specific tax level, programme its tax rate as 100.00% or higher.
4) Press the
5) To exit the tax level programming, press
More details on entering texts are located at the end of this chapter.
Correction of the tax level values
1) Switch the ECR into the "P" mode by pressing
2) Enter the number of the tax level you want to edit and press the
3) Re-program the parameters as described in section above.
4) You can print the newly programmed tax level values by pressing
5) Finish the corrections by pressing the
Printing format if ECR reads and successful-
ly looks up bar-code with other length than
15/18 or if a PLU has been read using the
PLU number that has length 15/18 and ECR
database contains the same EAN code with
given length (i. e. it is not considered an EAN
13+2/13+5 code)
Meaning
Printing of PLU number with sales item
Time printing on the receipt
Meaning
Checks and credits charge when total is
negative
(Refund) key. The display shows the number of programmed tax level and its rate.
TAX RATE
1
(Subtotal) key. Display will show label for programming the tax level name.
5.00%
(Total) key.
.
(T
) key.
OTAL
Programming manual
0 – do not print anything,
1 – print entire 18-digit long code
programmed for given PLU
Valid values
0 - no, 1 - yes
0 - no, 1 - yes
Valid values
0 - cash paid,
1 - charge by type of payment
.
(R
) button.
EFUND
(C
) key.
HECK
31
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-200T and is the answer not in the manual?