Information And Error Messages - ELCOM Euro-200T User Manual

Helpful advice

INFORMATION AND ERROR MESSAGES

If it is necessary to inform the operator on the current status of the ECR, or the ECR is in error state, the error
messages shown in table 8.1 are displayed.
Figure 8.1 - List of ECR messages
Message
100%
ADD ON - DISCOUNT LIMIT OVER
ADD ON - DISCOUNT
TO NEGATIVE VALUE
ADD ON - DISCOUNT
TO RETURNABLE PACKS
AMOUNT DUE
BAR CODE DUPLICATE
CARD NOT ACCEPTED
CODE SORTING
COMMUNICATION ERROR
CONTINUE ON SALE
CREDIT CARD PAYMENT LIMIT OVER
DATE ERROR
DATE REVERSE ORDER
DECIMAL PLACES
LIMIT OVER
DPT INACTIVE
DUPLICATE PRINT
ECR -- PC
ECR AFTER REPORT
ENTER SERVICE CODE
ENTER THE AMOUNT
OF CUSTOMER CASH
ENTRY ERROR
FINISH PURCHASE
FLAG ERROR
FORBIDDEN ENTRY
OF RETURNABLE PACKS
GT LIMIT OVER
EXECUTE REPORTS
GT NEGATIVE VALUE
HEAD OVERHEAT
HEAD UP POSITION
ILLEGAL EURO PHASE
86
Meaning
No external power supply is connected. The power supply is internal accumula-
tor. The percentage value indicates the status of internal accumulator charge.
Add on or discount amount limit over. Check the system flags.
Add on or discount to negative amount disabled.
Add on or discount to returnable packs disabled.
Information about amount that has to be paid for sale finish.
Bar code is assigned to another PLU.
Credit card not accepted during EFT terminal payment.
ECR sorts programmed bar codes.
Communication error between ECR and PC or EFT terminal.
ECR is ready to continue on sale.
Credit card payment limit is over.
Incorrect date entry.
Incorrect date entry.
Second system flag disables sale with more decimal places.
Sale through this DPT is forbidden.
The printing of duplicate of last receipt.
The communication between ECR and PC is running.
No sale from daily (total) report execution.
Unblocking programming mode can be done only by entry of service code.
Enforced entry of customer cash before sale finishing.
Unexpected entry. Incorrect sequence of keys pressed.
Maximum count of PLU in a sale has been reached (100), or maximum count
of lines in one receipt has been reached.
Incorrect flag entry.
Operation of bottles not can be performed.
Grandtotals reached the maximum amount. Execute daily (total) and periodical
report. Call your service technician.
Performed operation caused negative Grandtotal.
Information on the thermal head overheat. Wait a moment until normal con-
dition returns.
The thermal head is in an up position. Move it down to enable printing.
Access is not possible to this Euro phase.