Table of Contents
Advertisement
Reports
Total daily "X" report
Total "X" report contains:
•
consecutive number of the total "Z" reports that have already been executed
•
department report
•
cashier report
•
financial report
Periodical "X" report
The periodical "X" report gathers financial data from the total "Z" reports in the course of longer time period (i.e.
a week, a month, etc.). This report prints all financial data accumulated since the last periodical "Z" report.
Total daily "Z" report
The total "Z" report contains:
•
consecutive number of the total "Z" report being executed on the machine
•
department report
•
cashier report
•
financial report
After printing the memory contents of the total "Z" report, is added to the memory registers of the periodical
report and counters of total daily „Z" report are then reset.
Periodical "Z" report
The periodical "Z" report gets the data from the total "Z" reports in the course of a longer time period. It is
usually printed weekly, monthly, or quarterly or as needed. After printing the memory contents of the perio-
dic "Z" report, the memory is cleared.
Hours daily report
Hours daily report provides view of sales flow during the day and contains:
1.
Hours summary.
2. Number of sales and value of sales in current hours.
3. Total value of all sales.
Hours daily report must be performed always at the end of the day (otherwise there is cumulative value
from more days). After hours daily report is printed in „Z" mode, values are added to the values of hours
periodical report and counters are erased.
Hours periodical report
Hours periodical report provides view of sales flow in current hours in total through whole month and
contains:
1.
Hours summary.
2. Number of sales and value of sales in current hours.
3. Total value of all sales.
Hours periodical report is usually performed at the end of the month after hours daily report.
It is possible to perform it also in other period. Values of hours monthly report are erased after it is printed
in „Z" mode.
HOW TO PRINT "X" REPORTS
Switch the cash register into the "X" mode:
any of the key combinations shown in table 5. 2. to print
proper reports. The "X" report can be printed as many ti-
mes as desired without influencing data in ECR memory.
72
.Press
X
15-12-2005
11:07:39
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-200T and is the answer not in the manual?