ELCOM Euro-200T User Manual page 39

6) Press (S

UBTOTAL
PLU number and label ("
row. Press

7) Enter the data for the second PLU flag; orient yourself by the Figure 3.19. Correct mistypes by using
(C ) key. To the PLUs within 1001–1015 can not be linked any other PLU.

LEAR
Figure 3.19. Second PLU flag values.
Digit Default setting
1, 2 00
3 1
4 0
5 1
6 1
7 8
8) Press (S

current PLU number and label ("
row. Press

9) Enter the PLU name/description, maximum 18 characters (or 9 double width characters) for T mo-
del and maximum 24 characters (or 12 double width characters) for TX model. See the end of this
chapter on how to enter texts. You can correct mistypes by using
10) Press (S

display shows the current PLU number and label ("barcod") in the second display row and the
currently assigned bar-code in the first row. Press
steps won't run).
0000000000000000000
1
11) Enter the PLU bar-code either using the keyboard or using a scanner (scanner has to be connected
to ECR and properly configured). You can correct mistypes using

12) Press (S
warn you on this by displaying "
PLU that bar-code is assigned to already.
) to continue with programming of second PLU flag. The display will show current
flag2
") in the second display row and current value of the flag in the first
(T ) to leave PLU programming (next steps will not run)
OTAL
1 PLU flag 2
Meaning
Assigning the sale of another PLU to the sale of
an actual PLU (linked PLU)
Sales unit assigning
PLU stock information on PLU report
PLU sale possibility even if stock is negative
Split pricing possibility
HALO limit, maximum 8 (maximum number of di-
gits allowed)
) to continue with name programming for the current PLU. The display shows
UBTOTAL
name
(T ) to finish the PLU programming (next steps won't run).
OTAL
PLU name
1
) key to continue with programming of the bar-code for the current PLU. The
UBTOTAL
PLU barcod
) key. If you entered a bar-code that is already assigned to a PLU, the ECR will
UBTOTAL
barcode duplicate
0010118
") in the second display row and the name in the first display
(T

Programming manual
Valid values
00 – no linked PLU,
01 – PLU No. 1001 is linked,
02 to 15 – PLUs 1002-1015 are linked
1 – The first sales unit assigning,
2 to 8 – assigning the sales unit 2 – 8
0 – no, 1 – yes
0 – no, 1 – yes
0 – no, 1 – yes
1 - 8
(Clear) key.

) to finish the PLU programming (next
OTAL
(Clear) key.

" along with the PLU number of the
39