Quick Plu Stock Programming; Correction Of Programmed Plus; Programmed Plus Print Out - ELCOM Euro-200T User Manual

3) Enter the new price (maximum eight digits including decimals).

4) Press (S

5) Press (T

Quick PLU stock programming

The cash register also records stock information for each PLU. The PLU stock information can be changed
to another value directly, or you can alter stock by operations in the registration mode.
1) Switch the ECR to the "P" mode by pressing
2) Enter the PLU number and press the
start from PLU no. 1. The display shows current PLU number and label "
display row and the current stock for that PLU in the first row.
3) Enter stock value (up to nine digits, three decimal places including) and press:

• (S
UBTOTAL

• (S

• (D
Maximum stock value is 999 999.999. If you enter integer amount, enter the number and just

press . After pressing any of the above three keys, the ECR will continue with programming of
the stock for the next PLU.

4) Press (T

Correction of programmed PLUs

1) Switch the ECR to the "P" mode by pressing
2) Enter the PLU number and press the
scanning the bar-code will jump to the said PLU.
3) Continue programming the PLU values as described in the relevant section.
4) You can print out all programmed PLUs by pressing
rently programmed PLU by pressing
5) You can jump to any PLU using the procedure in step 2). Press
the PLUs.

Programmed PLUs print out

To verify programmed values, print them by pressing the
the cash register is in root programming mode, press the
PLUs that have been programmed will be printed. It is possible to print the programmed value of a particular

PLU by pressing
) key to continue in the price programming of the next PLU; proceed to step 3).
UBTOTAL
) key to finish the quick PLU price programming.
OTAL
1 PLU stock
) key to apply the entered number as the new stock value,
) key to add the entered number to the current stock or
URCHARGE
) key to subtract the entered number from the current stock.
ISCOUNT
) to finish the quick PLU stock programming.
OTAL
(EAN) key.

.

(S ) key. If you didn't enter any number, the ECR will
CALES
0.000

.

(PLU) button. You can also use the bar-code scanner:

(C

(EAN) key.

(C
HECK

(PLU) key and then the
Programming manual
stock
) key or you could print out the cur-
HECK

(T ) key to finish correcting
OTAL
) key in the PLU programming mode. If

" in the second
(C ) key. Only
HECK
41