Using External Usb Storage Devices; Instant Recording; Playback Of Recording; Main Menu - Strong SRT 8525 User Manual

Digital terrestrial hd receiver
Table of Contents

Advertisement

5.7 Using external Usb storage devices

We strongly recommend you to carefully read and follow the specified points mentioned in chapter
1.5 Usage of external USB devices!
Further please consider these points when you use your receiver with an external USB storage
device:
Before you disconnect the USB device from the receiver, we recommend using the
Remove the USB device function which is available in several menus of your receiver. If you
have removed the USB device unintentionally, then please reconnect it to be detected
again.
Well functioning multimedia playback is highly depending on the data rate supported
by the connected USB device. Especially for playback of video files and loading high
resolution pictures, a reading speed of min. 10 - 15 MB/sec is required. As high data rates
are not supported by all types of USB devices it is necessary to ensure that the used
USB device can fulfil this requirement. Mostly such data can be found on the website or
specification sheet of the USB device manufacturer.

5.8 Instant Recording

Your new receiver allows you to make an instant recording of programmes you are watching. Simply
press 4 to start the recording. To enter the duration for the recording, press 4 again.
Use 0~9 to input the recording time. For a recording duration of 45 min, just enter 45 and press ok
or for 1h 30 min, just enter 130 and press ok. During the recording a progress banner appears on
the upper left corner of your TV screen.
To open the recording info press . To stop the recording, press sToP.
*Please connect a USB storage device formatted in FAT32 with sufficient free space before you start a recording. For recording HD broadcast, we strongly recommend to use a high speed device.
WARnIng:

5.9 Playback of recording

If recordings were already made you have the possibility to access the HDD Manager directly from
viewing mode by pressing the u button. With pq select the record of your choice and with
ok start the playback in preview mode. To watch a record in full screen mode press ok again.
Alternatively you can press u to start playback in preview mode. Further options are displayed in
the Records menu. For a detailed description of the menu please refer to chapter 6.5 Records.

6.0 mAIn mEnU

The main menu gives you access to specific settings and multimedia functions. To access the main
menu, press mEnU in viewing mode. The main menu consists of the following sub menus: Program
Organizer, Channel Search, System Setup, Tools and Multimedia.
Press ExIT in the main menu to get back to the previous menu.

6.1 Programme organizer

Press mEnU and use tu to select the Program Organizer and press ok.
Following submenus are displayed: Channel Manager, Channel Sort and Delete all.
Use pq to select a submenu and press ok or u to access.
6.1.1 Channel manager
The channel manager allows you to move, skip, lock, delete and add channels to the favourite list.
To access this menu you will need to enter your PIN code (DEfAUlT PIn: 0000).
10
Within Irdeto encrypted services some events may be protected or limited
and following to that recording might not be possible. This might also be
the case for recording through the analogue output on Scart to a VCR or
DVD recorder. If maturity rating is activated for a specific recording you
will have to enter the appropriate PIN Code mATURITY RATIng PIn:
0000 to record this event.
PART 2 • English

Advertisement

Table of Contents
loading

Table of Contents