Remote Control - Strong SRT 8525 User Manual

Digital terrestrial hd receiver
Table of Contents

Advertisement

AUDIo (l/R)
3.
4.
vIDEo
5.
s/PDIf
6.
Usb
7.
hDmI
sCART
8.
9.
Power cord

2.3 Remote control

1.
q
2.
!
3.
0-9
4.
Av
5.
Tv/R
6.
mEnU
ExIT
7.
pq
8.
tu
9.
10. ok
11. EPg
12.
13. v+/v-
14. fAv
15. AUDIo
16. Zoom
17. P+/P-
18. RED/v.f
19. gREEn/TExT
20. YElloW/sUb
21. blUE/RCl
22. 2
4
To connect to your TV or VCR, alternatively you can connect to an
amplifier or HIFI system using an RCA cable.
To connect to your TV or VCR using an RCA cable.
To connect to a digital home theatre or audio amplifier with an
audio cinch cable.
To connect your USB storage device (stick, HDD, etc.)
To connect to the HDMI input of your TV using a good quality
HDMI cable.
To connect to your TV set using a SCART cable.
To connect your receiver to the local power supply system,
supporting a voltage range of ~ 100 – 240 V 50/60 Hz.
To switch the receiver between standby and working mode
To disable/enable the audio outputs of the receiver.
In viewing mode: to switch to a channel by entering its number
In menu mode: to enter numeric values
No function
Toggles between TV and RADIO mode
To access the main menu and in menu to return to viewing mode
Exits from the menu, sub-menu or cancels actions
In viewing mode: to change to the next/previous channel
In menu and channel list mode: to move the cursor up/down.
In viewing mode: to decrease/increase the volume
In menu mode: for navigation and to change settings in specific
menus
In viewing mode: to open the channel list or confirm displayed
messages
In menu mode: to open the menus and to confirm settings or
changes
To enter the Electronic Programme Guide.
Shows the current channel information (2x extended info)
To increase/decrease the volume level
Opens the favourite group selection
To open the list of audio languages and settings
To zoom into a specific area of the video, further pressing
increases zoom factor and zoom modes
In viewing mode: to switch through the channels
In menu/channel list: to scroll page up/down
In viewing mode: to switch the resolution between 576i, 576p,
720p, 1080i and 1080p (50 Hz)
In menu and Teletext mode: depends on the menu context
In viewing mode: to open Teletext (if broadcasted)
In menu and Teletext mode: depends on the menu context
In viewing mode: to select a subtitle language (if subtitles are
broadcasted)
In menu and Teletext mode: depends on the menu context
In viewing mode: to toggle between the two last watched channels
In menu and Teletext mode: depends on the menu context
In viewing mode: to pause TV picture
In multimedia mode: to pause playback of a file
PART 2 • English
Fig. 3

Advertisement

Table of Contents
loading

Table of Contents