System Setup - Strong SRT 8525 User Manual

PART 2 • English
Band:
Signal level and quality indicators will help you ensure that you have signal on the selected
frequency channel or frequency entered, as well as to adjust the antenna, if necessary.
After you have entered the settings correctly you will need to select Search (directly above the
signal bars) and press ok. The receiver will start to search for channels and if available with your
entered parameters, they will be added to the channel list. If you don't get a satisfying result after
the search process, please contact the local service or check reliable websites/magazines if the
entered values are correct.

6.3 system setup

Press mEnU and use tu to select System Setup, then press ok. Following submenus will be
displayed: Language Setting, Output Setting, Time Setting, Auto Standby, Parental Guidance and Reset
Factory default.
Use pq to select the desired submenu and press ok or u to access.
6.3.1 language setting
In this menu you can set your language of chioce for menu, audio and subtitles.
OSD Language:
Audio Language:
Subtitle Language:
noTE:
Please also consider that events may contain "built in" subtitles which can't be disabled.
6.3.2 output setting
In this menu you can set the output parameters of the receiver according to the connected TV set
and for the connected audio amplifier if applicable.
TV Mode:
Video Output:
Screen Mode:
For the VHF frequency band commonly used 7 MHz, for UHF
frequency 8 MHz is used.
Use tu to select menu language.
Digital TV allows transmitting more than one audio track/
language. If a channel has multiple audio tracks/languages,
the receiver will select the suitable audio track/language
automatically according to your selection.
This setting allows you to define the subtitle language. Use tu
to select a subtitle language and the receiver will display the
subtitles in this language automatically (if available). If you do not
want to display subtitles, then adjust the setting to Off.
Subtitles will be displayed when available. Availability depends on the
local broadcast.
Use tu to select the mode. Commonly the PAL standard is
used, but it might be that you need to use the setting NTSC. We
recommend referring to the user manual of your TV set to check
the correct setting.
Use tu to select between RGB and CVBS modes.
Use tu to adjust this setting in accordance with the aspect
ratio of your TV set (4:3 or 16:9) and the preferred conversion.
The options are: Auto (automatic detection of aspect ratio), 4:3
Panscan (displays 16:9 broadcasts full screen and cut upper and
lower parts of 16:9 video on your 4:3 TV), 4:3 letterbox (displays
16:9 widescreen broadcasts with black bars on top and under the
picture on a 4:3 TV). For a modern 16:9 TV set following options
can be set: 16:9 Wide Screen, 16:9 PillarBox (4:3 broadcasts will be
shown with black vertical bars on the left and right side of the
image) and 16:9 Pan&Scan. We recommend trying these settings
in order to find the option that suits you best. Do not forget
13