Strong SRT 8525 User Manual page 14

Digital terrestrial hd receiver
Table of Contents

Advertisement

PART 2 • English
Now your TV channel list will be shown. To switch between the TV and radio list use tu. To
navigate within the list, use the pq buttons.
Move
Skip
Lock
Delete
Add channels to favourite lists
6.1.2 Channel sort
This menu allows you to sort the channels by following methods:
By LCN:
To move a channel to a new position, use the pq buttons to
select the channel, then press the RED button. Now next to the
channel's name the symbol
channel can be moved to another position. To do so, use the pq
buttons to move it and press ok to confirm. Proceed as described
for any other channels you wish to move. You can also correct the
channel selection for moving by pressing the RED button again.
To skip a channel during switching through the channel list, use
the pq buttons to select the channel, then press the gREEn
button. Now next to the channel's name the symbol
After that, channels marked with
switching through the channels in viewing mode. Proceed as
described for any other channels you wish to skip. You can also
correct the channel selection by pressing the gREEn button
again. Channels marked for skipping will stay accessible within
the channel list.
To lock a channel of the channel list, use the pq buttons to
select the channel, then press the YElloW button. Now next to
the channel's name the symbol
marked with
will request the PIN code (DEfAUlT PIn: 0000)
when switching to it. Proceed as described for any other channels
you wish to lock. You can also correct the channel lock by
pressing the YElloW button again.
To delete a channel, use the pq buttons to select the channel
then press the blUE button. Now you will be asked if you want
to delete this channel. Press ok to confirm or ExIT to cancel. The
channel(s) you delete from the channel list will be permanently
removed, also if this channel is part of the favourite list.
To add a channel to a favourite group, use the pq buttons to select
the channel then press the fAv button. Now the favourite group
selection will be shown. Select the group to which the channel
should be added with pq and press ok. The selected channel
will be marked with the symbol v. Additionally you can also select
another favourite group where to add this channel. To do so, press
ok at the this group. When you have added the channel to the
group(s), press ExIT to go back to the channel list. There you can
proceed in the same way to add other channels to favourite groups.
You can also remove a channel from a favourite group by
pressing the fAv button again and selecting the group it is part
of. Then press ok to remove the symbol and the channel will be
removed from this (these) favourite group(s).
The channels will be sorted according to the LCN (Logical
Channel Numbering) system, which may be broadcasted in your
area. If the operator does not support LCN your channel numbers
will start with channel number 800, otherwise the LCN channels
will be sorted in regional order starting with 1. None LCN
channels can be found again starting with number 800. Further,
is shown. This indicates that this
will be ignored when
is shown. After that, channels
is shown.
11

Advertisement

Table of Contents
loading

Table of Contents