Bundling The Cables; Preparing The Remote Control Unit - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
Initial installation

Bundling the cables

The cables connected to the TV set can be bundled and fixed to the Table
Stand (1 , Floor Stand (1 or Rack
Then fit the cover for the connections (see page 18).
(1 Available mounting options see page 145.
(1 using the Velcro cable tie provided.
- 20 -

Preparing the remote control unit

Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batteries
together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you
to change the batteries.
Dispose of used batteries in an environmentally friendly way (see page
146).
Push the cover back on from below after inserting the batteries.
Adjusting the remote control for operating the TV set
Press the TV button.
See page 129 for how to operate other Loewe appli-
ances and how to reprogramme the remote control
buttons.