Loewe Connect ID 46 Operating Instructions Manual page 122

Connect ID 32-46
Operating instructions
External devices
If you want to set up or change a speaker system:
Select Configuration/modification,
OK call selection.
SOUND COMPONENTS WIZARD
Please specify here whether you want to completely reconfigure a speaker
system or whether you want to limit the configuration to changing the speaker
connections, the speaker distances from the listening position or the individual
speaker levels in relation to each other.
SOUND COMPONENTS
Configuration/modification of speaker system
Complete
Connections only
Distances only
Levels only
Select
OK
Select Complete,
OK continue to connect and set the front speakers.
SOUND COMPONENTS WIZARD
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
SOUND COMPONENTS
Connect front speakers
kers External speakers
40 Hz
Proceed
OK
Select External speakers or TV speakers,
go to the menu line below and
set the lower limit frequency of the external front
speakers in 10 Hz steps.
SOUND COMPONENTS WIZARD
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
SOUND COMPONENTS
Connect front speakers
External speakers
90 Hz
Proceed
OK
- 122 -
OK
40Hz 40Hz
TV speake
90Hz 90Hz
➠ Select the start value of the frequency response of
the speakers for the right setting (e.g. 50Hz for the
specification "Frequency response 50-20.000Hz").
See the technical data of the speakers for the value.
➠ You can replace the external front speakers by the
TV speakers if necessary. In this case, select TV speak-
ers. Then transmit the sound of the front speakers.
OK continue to connect and set the surround
speakers.
Select yes for external speakers.
➠ If no surround speakers are connected, these can be
simulated using the front and centre speakers.
Go to the menu line below and
set the lower limit frequency of the surround
speakers in 10 Hz steps.
➠ Select the start value of the frequency response of
the speakers for the right setting.
OK continue to connect and set the centre speaker.
Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no if
no centre speaker is connected.
➠ If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
for External speakers go to the menu line below
and
set the lower limit frequency of the centre
speaker in 10 Hz steps.
➠ Select the start value of the frequency response of
the speakers for the right setting.
OK continue to connect the Subwoofer.
yes is the selection for subwoofer.
➠ If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for the
subwoofer as far as possible.
continued on the next page