Loewe Connect ID 46 Operating Instructions Manual page 137

Connect ID 32-46
Operating instructions
Troubleshooting
Problem
Errors occurred when running a CA module.
No sound via the external digital audio
amplifier.
A programmed recording was not made.
There is no start or end of a programmed
recording although the automatic time
control (Accurate Recording) was used.
The picture format cannot be adjusted.
When the Picture format button is pressed,
the 3D mode selection appears instead of
the Picture format selection.
The free capacity of the external hard disc is
essentially indicated smaller than expected in
the OSD.
No IP address will be issued to your TV set in
spite of automatic IP configuration.
- 137 -
Possible cause
a) The external digital audio amplifier does
not support the selected sound format
(Dolby Digital, dts, MPEG).
b) TV set and external digital audio amplifier
are not connected with each other.
The provider deleted the programme from
the EPG data, for example due to a pro-
gramme change.
The station from which the recording was
made does not support automatic time
control (Accurate Recording).
The transmission time of the program was
delayed and the channel from which the
recording was made has not updated the
data.
A HbbTV application is loaded but is not
active (not displayed).
The TV set is displaying picture material in
3D.
The hard disc has been formatted on FAT32
on a PC with Microsoft Windows (see also
page 109).
No DHCP server is working on your network.
Remedy / hints
Switch the TV set off. Remove the CA-module
from the TV set. Wait a few seconds. Reinsert
the CA-module. Switch the TV set on again.
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations on the TV
set switch to stereo in the Status display
(INFO) – Language/sound (green button).
b) Connect AUDIO DIGITAL OUT from the TV set
to a digital input of the external digital audio
amplifier and select the appropriate input to
this.
Only the broadcasting organisations are re-
sponsible for transmitting data for the automa-
tic time control. The availability of the appro-
priate data cannot be guaranteed.
Only the broadcasting organisations are re-
sponsible for transmitting data for the automa-
tic time control. The availability of the appro-
priate data cannot be guaranteed.
End the HbbTV application with the END
button (see page 82).
Whilst 3D material is being displayed, the
picture format cannot be changed (see page
39).
Format external hard disc on TV set again via
TV menu Settings Miscellaneous
external hard disk.
Set up a DHCP server.
Assign the IP addresses for the TV set manual-
ly.
Format