Mhp - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
Interactive data services

MHP

MHP (Multimedia Home Platform) is a DVB standard for transmitting and
displaying interactive content on digital television based on the Java™
programming language.
MHP allows you to receive and use both services transmitted by digital
terrestrial channels as well as television programmes and those broad-
cast via the Internet.
➠ MHP can only be received in Italy from some stations which broadcast
their programmes via DVB-T. Italy must therefore be chosen as the
Location of TV set.
➠ To be able to access paid content from these stations, you need the
CAM module as well as an active Smartcard. The relevant service
must be ordered directly from the station.
➠ A corresponding USB stick ("MHP stick"), which has to be inserted
into a USB port on the TV set, is necessary to receive interactive MHP
services. In the case of sets intended for the Italian market, this stick
has been fitted into a USB port on the TV sets at the factory since
the middle of December 2011.
➠ For sets already available on the market, the MHP stick can be pur-
chased later as an accessory from your dealer (from Chassis SL15x).
➠ The MHP stick must be inserted directly at a USB port of the TV set.
Operation with a USB hub is not possible.
➠ The red coloured button is used for showing the applications with
the interactive data services HbbTV and MHP. To avoid complications
when using MHP, we recommend switching off HbbTV mode (see
HbbTV mode on/off on page 83).
➠ The MHP stick provided by Loewe cannot be used as a storage
medium.
➠
When formatting the MHP stick, all MHP functions are deleted and
cannot be restored.
- 84 -
Opening an MHP application
If an MHP application is available for the selected channel after the chan-
nel has been changed, a message will appear on screen to that effect.
➠ The MHP stick from Loewe is correctly inserted into
a USB port of the TV set.
➠ MHP is offered by the selected channel.
Red button: Display the MHP application.
The appearance, key assignment and available functions
of the MHP application are dependent on the provider.
Loewe takes no responsibility for the accessibility,
functionality or content of MHP applications.
Hiding an MHP application
END: Hide the MHP application (EXIT).
After hiding an MHP application, it may be the case that
the OK button is not properly enabled by the MHP
application.
It is not then possible to call up the list of stations/
favourites with the OK button.
Change the station with P+/– to restore the original
function of the OK button.
Settings for MHP
You can specify settings for MHP and open applications directly by
using the Applications list button in the MediaPortal (see page 14).
Go back one step inside the application (BACK).