Loewe Connect ID 46 Operating Instructions Manual page 68

Connect ID 32-46
Operating instructions
Media +
Explanation of the adapter settings
IP The current assignment method for the IP address of
configuration your TV set.
IP address Your current IP address.
Subnet mask Your current subnet-mask IP address.
Gateway (only for IP configuration
Your manually set gateway IP address.
DNS server 1 (only for IP configuration
Your manually set first DNS server IP address.
DNS server 2 (only for IP configuration
Your manually set second DNS server IP address.
Network SSID The name of your network.
MAC address Indicates the MAC address that is built into the hardware
(TV) of your TV set's wired network adapter (LAN).
MAC address Indicates the MAC address that is built into the hardware
(WLAN)
of your TV set's wireless network adapter (WLAN).
Link status
Gives you information about the current status of your
wireless connection (save settings, connecting, login
failed, access point not found, not connected, connec-
tion established).
Link quality Specifies the signal strength as a percentage.
- 68 -
manual)
manual)
manual)
Explanation of the setting possibilities in Network settings menu
(continued)
Other This menu contains settings which have to be changed
less frequently.
MEDIA MENU
Network settings
access Other
Select Other,
OK call other network settings.
Select desired setting,
or numeric buttons: Perform changes.
Enter characters (procedure same as Rename stations,
see page 47).
Host name: Give your TV set a name so that it can be
uniquely identified in the network.
Use proxy server: Indicate whether your network access
is to be direct or via a proxy server.
➠ A proxy server is not necessary for most home
networks.
➠ Contact your home network administrator if you are
unclear about the proxy server settings.
Proxy server name:
(only available if Use proxy server
Indicate the name or IP address of the proxy server used.
Proxy port number:
(only available if Use proxy server
Indicate the network port number.
Proxy server requires login:
(only available if Use proxy server
Specify whether your proxy server requires a special
login.
User name and Password:
(only available if Proxy server requires login
Enter your login data for the proxy server.
MENU: Quit Other network settings menu.
Reset to The settings for the network adapter revert back to the
factory factory settings.
settings Whilst the settings are reverting back to the factory set-
tings, the TV set must not be switched off!
Reset to factory settings
OK
yes)
yes)
yes)
yes)