Tv Set As A Monitor; Positioning/Aligning Dvb-T Antenna - Loewe Connect ID 46 Operating Instructions Manual

Connect id
Table of Contents

Advertisement

Connect ID 32-46
Operating instructions
Initial installation

TV set as a monitor

You can also use your TV set just as a monitor, i.e. if you only use it with
a PC. The tuner in the TV set cannot be used in this mode.
You select the option to use the TV set just as a monitor when perform-
ing the initial installation (see page 22).
INITIAL INSTALLATION WIZARD
Please specify which AV channel your TV set should switch on to.
INITIAL INSTALLATION
AV selection
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
Proceed
OK
Select AV connection.
The selected AV connection is shown when
switching the TV on. To choose other AV
connections, see page 33.
OK Proceed.
Initial setup continues with the Time and date setup (see
page 29).
- 31 -
OK
Back

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align-
ment of the antenna. Ask your dealer to tell you which channels are
used to broadcast the DVB-T stations in your region.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
MENU: Call TV menu.
Select Settings,
go to the menu line below.
Select Stations,
go to the menu line below.
Select Manual adjustment,
OK call manual adjustment.
SIGNAL SOURCE
Select the area in which you want the broadcaster to search here. You can use
the
button to automatically select station by station.
MANUAL ADJUSTMENT
Signal source
Channel
Frequency
Bandwidth
Name
C/N
Level
BER
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
The value for BER should be as low as possible.
Thereafter perform an automatic search for all DVB-T
stations (see page 44).
DVB-T
DVB-C
E05
177.50 MHz
7 MHz
81
80
0 E-7
Store
Search
DVB-S
Ca

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents