Bundling The Cables; Preparing The Remote Control Unit - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide
Preparing the TV set
Connecting the TV set to the Home network
You may link your TV set to the home network by a wired connection
(Ethernet, Powerline) or by a wireless radio connection (WLAN).
Please contact your specialist dealer for more information on Power-
line.
For the network adaptor configuration, see chapter System settings,
section Multimedia / Network – Network settings.
Under no circumstances may the TV set be wired and at the
same time connected by a wireless connection to the same
network, e.g. router. This may cause severe operational faults!
Example for a wired connection
Connect the LAN socket of your TV set to the LAN switch/router of
your home network with a network cable (available from your dealer).
LAN-Switch / Router
Home Server,
z.B. PC
Example for a wireless connection
You can connect the TV set to your home network by a wireless radio
connection via the WLAN antenna inside the set.
Shadow effects of various materials, such as reinforced concrete,
metal surfaces, etc., attenuate the WIFI signal sometimes signifi-
cantly or completely.
.
WLAN-Router
Home Server,
z.B. PC
TV-Gerät
TV-Gerät

Bundling the cables

Bundle the connected cables at the middle of the TV set and feed the
cables through the cutout in the cover.
Then attach the cover for the connections (see chapter Preparing
the TV set, section Set covers).
The cables connected to the TV set are held by the cover and fixed
on the TV set.
Depending on the installation version, the cables should be laid accord-
ingly (see installation instructions of the mounting option).

Preparing the remote control unit

Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batter-
ies together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you
to change the batteries.
Dispose of used batteries in an environmentally friendly way (see
chapter Environment / Legal information).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control for operating the TV set
Press the TV key.
See in chapter External devices,section Operating
Loewe units how to operate other Loewe appliances
and how to re-programme the remote control keys.
13