Timer Recording With External Devices - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
External devices

Timer recording with external devices

➠ The recording of HDTV stations with external devices is only possible
to a limited degree. The HD transmission is scaled down to SD quality
and output at the AV output for the recording.
Recorder with Digital Link Plus
If you use an externally connected recorder with Digital Link Plus or a
similar system, the TV set and connected recorder exchange data (e.g.
compare station lists TV set/recorder).
Please consult the operating manual of your recorder to find out of your
recorder is Digital Link Plus compatible. In addition use only Euro-AV
cables for the connection between TV set and recorder.
Analogue stations
The timer data are transmitted automatically from the TV set to
the recorder after programming is complete.
The recording is then controlled by the recorder and the record-
er tuner is used for reception of the programme.
The recording data are not saved in the timer overview of the TV
set. Consequently if you want to change or delete the timer data
then you must do so on the recorder.
Digital stations
If you want to record digital stations with an externally connect-
ed recorder, then the DVB tuner is used and the TV device takes
over control of the recorder. Then the station on the TV set is
locked during the timer recording.
It is not possible to switch over to another DVB station.
If using devices with DVB-T/C Twin-Tuner (Equipment variants see
page 144), analogue stations can be viewed on the TV set paral-
lel to the recording with the external device.
Copy protection
For legal reasons, copy-protected broadcasts are not emitted on the
EURO AV socket AV.
- 128 -