Configure Picture In Picture (Pip) Mode - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
Picture in Picture

Configure Picture in Picture (PIP) mode

You can set different parameters for the picture in picture mode in the
PIP menu.
Open the PIP menu
➠ PIP mode started,
if not, press PIP button.
➠ In Standard PIP functionality:
The frame is green,
if not, press the green button.
MENU: Call PIP menu.
POSITION
Here, you can determine the position of the small picture, top left, bottom left,
top right or bottom right. Without a screen display you can also do this with the
"up", "down", "left" and "right" buttons.
TV MENU
Settings
PIP
Position
upper right
Explanations of the setting options in the PIP menu:
➠ Note restrictions for the PIP mode (see page 50).
Position You can determine the position of the small picture
here (upper left, bottom left, bottom right, upper right).
Without a screen display the position can also be
changed with the menu control buttons (see right
hand column).
Functionality You can switch the PIP functionality between iPIP and
Standard PIP (also see right hand column).
See page 50 for a more detailed explanation of the
PIP functionality.
Functions
...
- 51 -
Change position of Small PIP
➠ Other than the status line, which may possibly be
displayed, no other display is shown on the screen:
The position of the small picture can also be selected
under Position in the PIP menu (see left hand column).
Switch PIP functionality (iPIP / Standard PIP)
➠ PIP menu is opened.
Move the PIP into a corner of the screen.
TYP
Sie können wählen, ob Sie Ihr Zweitbild als überblendetes Kleinbild oder als
ein die rechte Schirmhälfte füllendes Bild ("Split Screen") sehen wollen.
TV MENU
Settings
PIP
Functions
Standard PIP
iPIP
Select Functions,
go to the menu line below.
Select iPIP or Standard PIP.