External Devices; Connections Menu - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions

External devices

Connections menu

Settings for the connection of external appliances are made in this menu.
Calling the connections menu
MENU: Call TV menu.
Select Connections,
go to the menu line below.
TV MENU
Connections
Sound components
Select the desired setting.
Explanations of setting possibilities in the Connections menu:
Sound The sound components wizard helps you to configure
components the components which are used to reproduce the TV
sound. You will find a description of the sound compo-
nents wizard on page 119.
Antenna DVB Here you can set the parameters of the DVB-T and the
DVB-S antenna with the antenna wizard. The setting
options of the DVB antennas are described in the first
time operation routine (from page 22).
AV connecting See right column for explanations.
settings
Miscellaneous See page 113 for explanations.
- 112 -
Antenna DVB AV connecting settings
OK
AV connection settings
In the AV connection settings menu the parameters for the AV and AVS
connection sockets can be adapted.
Calling AV connection settings
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select AV connecting settings,
go to the menu line below.
Miscel
Select the desired setting.
Explanations of setting possibilities in the AV connecting settings
menu:
Device at Indicate here whether a set and, if yes, which one is
connection AV connected to the AV socket.
AV standard You set the AV standard of the connected appliance to
AV or AVS here.
Normally you leave the setting on Automatic. If the
standard of the connected appliance is not detected
automatically, select the right standard.
Ask your dealer or consult the operating manual of the
connected appliance if necessary.
Signal type You set the signal type of the device connected to AV
or AVS here. Normally, you should leave the setting at
Automatic; otherwise select a suitable signal type. You
can find out more from your dealer.
Allow
If this function is activated, the video and audio of an
switching external unit connected to the AV connector will im-
voltage mediately be reproduced on all TV broadcast sites when
playback is started up, provided that the external unit
emits a switching voltage.
In the case of external units with Digital Link Plus sup-
port, the video and audio are reproduced independently
of the setting as soon as playback is started.
TV MENU
Connections
AV connecting settings
Device at connection AV AV standard
No device ...
Signal type Allow switchin