Bundling The Cables; Preparing The Remote Control Unit - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
Preparing the TV set

Bundling the cables

Connect ID 40/46
When installing the TV set with the mounting option Table Stand
Dynamic (included in scope of delivery):
Thread the Velcro cable tie (K) through the holder of the Table Stand,
connect the cables to the TV set and secure them with the Velcro
cable tie. For more information, refer to the installation instructions
of the Table Stand Dynamic.
Then fit the cover for the connections (see chapter Preparing the
TV set, section Set covers).
Connect ID 55
When installing the TV set with the WM62 wall bracket mounting option
(included) it is not possible to fix the cables to the TV set.
14

Preparing the remote control unit

Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batter-
ies together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you
to change the batteries.
Dispose of used batteries in an environmentally friendly way (see
chapter Environment / Legal information).
Push the cover back on from below after having inserted the batteries.
K
Adjusting the remote control for operating the TV set
Press the TV key.
See in chapter External devices,section Operating
Loewe units how to operate other Loewe appliances
and how to re-programme the remote control keys.