Related Manuals for Loewe Individual 55 Compose 3D
Summary of Contents for Loewe Individual 55 Compose 3D
- Page 1 Individual Individual 55 Compose 3D, Individual 46 Compose 3D, Individual 40 Compose 3D, Individual 32 Compose Sound 3D Operating instructions...
-
Page 2: Overview Of The Most Important Functions
Overview of the most important functions Set operating mode Colour key function during radio operation Red button: TV operation On/Off screen Yellow button: Last selecting station Radio operation (standard assignment) The assignment of the AUDIO button can be changed (see page 133). Button functions On/Off of the television set Call MediaPortal,... -
Page 3: Remote Control - Tv Functions
Remote control – TV functions Sound off/on ......................(page 38) LED display for current operating mode ..............(page 133) Switch over to TV mode ..................(page 22; 133) Switch over to operate recorder .................(page 133) DR archive ......................(page 103) Set picture format ....................(page 41) Electronic Programme Guide on/off ................(page 56) Teletext/MediaText on/off................(page 58;... -
Page 4: Acknowledgements
Acknowledgements Loewe Opta GmbH Printed in Germany Industriestraße 11 Date of issue 11/11-2.0 TB/FP D-96317 Kronach © Loewe Opta GmbH, Kronach www.loewe.de ID: 7.5.0 All rights including translation, technical modifications and errors reserved. -
Page 5: Table Of Contents
Contents Overview of the most important functions ..........2 Daily operation (continuation)............... 37 Selecting audio/video source ..............37 Remote control – TV functions ..............3 Adjusting the sound ................38 Adjusting the picture ................40 Acknowledgements .................. 4 3D function ................... 42 Welcome .................... - Page 6 Setup possibilities Individual 32 ............152 Devices to the PC IN connection ............122 Environment ..................153 Sound components wizard ..............123 Connecting Loewe sound system ............124 Legal notes ................... 154 Connecting active loudspeakers ............125 Glossary ....................155 Adjusting the speaker system ..............
-
Page 7: Welcome
In addition to the remote control, a PC keyboard can be connected to integrated loudspeakers. one of the USB ports on your TV and then used to control your TV set Many Loewe TV sets are fitted with a digital multi-channel audio decoder (see also page 138). for impressive 5.1 surround sound. -
Page 8: For Your Safety
For your safety For your own safety and to prevent unnecessary damage to your device, Power supply read and comply with the following safety instructions: The wrong voltage can damage the set. This equipment must only be connected to a mains power supply which has the same voltage and Proper use and environmental conditions frequency as that specified on the rating plate;... - Page 9 TV set. repaired or serviced by authorised television technicians. Please only use Loewe 3D glasses (see Accessories on page 148) in Only use original accessories such as Loewe stands if possible (see Acces- conjunction with Loewe 3D TV sets.
-
Page 10: Control Unit Front Side Of The Device (Individual 55 / 46 / 40)
= Digital Recorder active DR + (archive recording) Infrared transmitter: When showing 3D content, the 3D glasses Loewe Active Glasses 3D are controlled via the infrared sensor. Button M: Call the menu in the menu: up/down Button R:... -
Page 11: Connections Rear Side Of The Device (Individual 55 / 46 / 40)
AUDIO OUT R - Speaker connection right ( + /–) ANT SAT - Satellite antenna (Sat tuner 1) AUDIO LINK - Surround audio outputs (analogue) SYSTEMSPEAKER - Loewe system speaker connection CI-COMMON INTERFACE - Common Interface 1 (CI slot 1) 11 -... -
Page 12: Control Unit Front Side Of The Device (Individual 32)
= Digital Recorder active (archive recording) DR + Infrared transmitter: When showing 3D content, the 3D glasses Loewe Active Glasses 3D are controlled via the infrared sensor. Button M: Call the menu in the menu: up/down Button R:... -
Page 13: Connections Rear Side Of The Device (Individual 32)
Connections rear side of the device (Individual 32) CI-COMMON INTERFACE - Common Interface 1 (CI slot 1) HDMI 1 - HDMI input 1 HDMI 2 - HDMI input 2 CI-COMMON INTERFACE - Common Interface 2 (CI slot 2) PC IN - VGA/XGA input HDMI 3 - HDMI input 3 AV - Euro-AV socket USB - USB connection... -
Page 14: Operating Convenience
Operating convenience General information on menu operation Menu operation (example: TV menu) Menus for the individual modes (TV, Radio, PIP, EPG, Teletext, MediaPortal The operation can be divided basically into two areas: The operation of and DR archive) are called with the MENU button. dropdown lists (e.g. -
Page 15: Operating Convenience With Wizards
(DR + ) (see page 130 onwards). Software update You can download the latest software for your TV set from the Loewe Service site and update using a USB stick (see page 134). Equipment and upgrade options, see page 150. -
Page 16: Mediaportal
Operating convenience MediaPortal Description of the individual functions: Here you call the TV mode of your TV set. The MediaPortal is the central overview page for your TV set‘s functions. See page 36 for further information. From here you can gain access to TV channels, local and online media, digital radio and to the archive of the Digital Recorder. -
Page 17: The Index In The Tv Set
Operating convenience The index in the TV set The info display The index explains the TV functions and the terms that you may be con- The info display provides an info text appropriate to the on-screen display fronted with when operating the TV set. You can start all the assistants that can assist you further with the operation of your TV set. -
Page 18: Tv Menu - Overview Diagram
Operating convenience TV menu – Overview diagram TV menu Recording Picture Sound Connections Settings Sound mode Sound components Stations Recording wizard Search wizard Dolby PLII mode Antenna DVB Picture adjustment Timer list Manual adjustment Sound adjustment AV connecting settings Contrast Pre-record time Change stations Audio commentary volume... -
Page 19: Radio Menu - Overview Diagram
Operating convenience Radio menu – Overview diagram Radio menu Stations Sound Timer functions Search wizard Sound mode Switch off once Manual adjustment Dolby PLII mode Switch off daily Sound adjustment Change stations One-time alarm Headphone volume Select/change favourites Wake up Mon-Fri Loudness Wake up Sat more... -
Page 20: Initial Installation
Connect the TV set to a 220-240V mains socket: from your Loewe dealer. Only use Loewe installation solutions (e.g. wall First plug the small plug of the power cable into the mains connection mounts, floor stand) that are included in the Accessories –... - Page 21 (Ethernet, Powerline) or by a wireless radio connection (WLAN). Please contact your specialist dealer for more information on Powerline. As an accessory you can obtain a Loewe system speaker Stereospeaker I Sound for certain set sizes which can be fitted underneath the set and For the network adapter configuration, see page 71.
-
Page 22: Bundling The Cables
Push the cover back on from below after inserting the batteries. Individual 32 Adjusting the remote control for operating the TV set Press the TV button. See page 133 for how to operate other Loewe appli- ances and how to reprogramme the remote control buttons. - 22... -
Page 23: Turning The Set On/Off
Initial installation Turning the set on/off Switching the TV on/off on the control unit To switch the TV set into Operating mode or switch it off into Standby Switching the TV set to standby mode mode, press the middle of the On/Off button for about 2 seconds. Press the mains switch on the bottom of the set. -
Page 24: First Installation Wizard
Initial installation First installation wizard Energy Home Mode: efficiency The emphasis for home use is on low energy consump- (continued) tion. The automatic dimmer is activated. Initial installation after switching on for the first time This wizard starts automatically after the set is switched on for the first Premium Mode: time, however it can also be called later manually in the TV index, see This mode optimises the settings to a brighter environ-... - Page 25 Initial installation Selecting Setting options for DVB-T reception: INITIAL INSTALLATION antennas Connect antenna cable(s) If you have not selected a DVB-T antenna in the antenna selection: Con- Antenna cable(s) for: to antenna socket(s): tinue with setting options for DVB-C reception on page 26. Antenna/cable (analogue) ANT TV DVB-T...
- Page 26 Initial installation Setting options for DVB-C reception: Setting options for DVB-S reception: If you have not selected a DVB-C antenna in the antenna selection: Con- If you have not selected a DVB-S antenna in the antenna selection: Continue with Setting options for all types of reception on page 32. tinue with Setting options for DVB-S reception (see right hand column).
- Page 27 Initial installation Setting options for the satellite system (single satellite): Setting options for the satellite system (2 satellites on 22 kHz switchbox / 2 satellites on toneburst switch): Select single INITIAL INSTALLATION (DVB-S) Satellite satellite Select single satellite INITIAL INSTALLATION (DVB-S) selection Astra1 19,2°E Hellas Sat2 39°E...
- Page 28 Initial installation Setting options for the satellite system INITIAL INSTALLATION (DVB-S) frequencies (max. 4 satellites on DiSEqC multiswitch): LNB frequencies ASTRA1 19,2°E Low band 9750 MHz Settings ASTRA1 19,2°E High band 10600 MHz Hot Bird 13°E Low band 9750 MHz INITIAL INSTALLATION (DVB-S) DiSEqC Hot Bird 13°E High band...
- Page 29 Initial installation Setting options for the satellite system Manual INITIAL INSTALLATION (DVB-S) registration (DiSEqC one cable communal system): Manual registration (for socket ANT SAT) Transmission channel (for socket Transmission frequency 1284 DiSEqC one ANT SAT) PIN protection INITIAL INSTALLATION (DVB-S) Define/change PIN 0000 cable...
- Page 30 Initial installation Setting options for the satellite system (other communal installation): Select single INITIAL INSTALLATION (DVB-S) satellite Select single satellite Astra1 19,2°E Hellas Sat2 39°E Hot Bird 13°E Hispasat 30°W Astra2 28,2°E Intelsat10 02 1°W Astra3 23,5°E Intelsat901 18°W Atlantic Bird1 12,5 °W Nilesat 7°W Atlantic Bird2 8°W Pan Am Sat 43°W...
- Page 31 Initial installation Setting options for DVB-S reception (continued): Search If you want to run the station search independently of method the channel grid, select frequency search for the search Test reception FIRST INSTALLATION WIZARD method. You should now receive a picture and sound from the following satellite: ASTRA1 19,2°E Level Symbol rates...
- Page 32 Initial installation Setting options for all types of reception: OK Start automatic search. Favoured INITIAL INSTALLATION signal source The set now searches for TV and radio stations. Favoured signal source The stations found in the automatic search are divided DVB-T DVB-C into the appropriate station blocks depending on the ASTRA1 19,2°E...
- Page 33 Initial installation Station Info FIRST INSTALLATION WIZARD INITIAL INSTALLATION selection if radio stations The automatic radio station search and sorting has ended. Station selection if same LCN 336 new radio station(s) has (have) been found. same LCN France 2 HD BBC TWO The number of found radio stations is displayed.
- Page 34 Initial installation Sound playback SOUND COMPONENTS via ... Sound playback via ... TV speakers Speaker system HiFi/AV amplifier Sound projector HiFi/AV amplifier or TV speakers (switchable) Sound projector or TV speakers (switchable) Proceed Select sound components. This selection indicates which sound components you want to use to hear your TV sound.
-
Page 35: Tv Set As A Monitor
Initial installation TV set as a monitor Positioning/aligning DVB-T antenna You can also use your TV set just as a monitor, i.e. if you only use it with If you are receiving one or more DVB-T stations with picture and sound a PC. -
Page 36: Daily Operation
Daily operation Select station Select station with the station list ➠ In normal TV operation, without further displays, no Select station with P+ / P– favourites selected: P+/P– Station up/down. OK Call Station list. The status display with station title, progress bar, time and sound identification signal is shown briefly (see page 46). -
Page 37: Daily Operation (Continuation)
Daily operation Selecting audio/video source Select station via favourites list You can save your favourite stations in 6 favourites lists (e.g. for multiple Select the AV source via the AV selection users). Each favourites list can contain up to 99 stations. After initial instal- ➠... -
Page 38: Sound Off/On
Daily operation Adjusting the sound Explanations of the sound settings: Select the number of speakers you want to hear. The Sound mode Switching sound off/on selection depends on the connected sound components (from page 123) and on the transmitted audio signal. Sound off. - Page 39 Daily operation Explanations of the sound settings: more ... Loudspeaker/ For analogue stations: In the case of programmes with Headphone twin sound, you can select separately between Mono/ sound Stereo or Sound 1 or Sound 2 for the loudspeakers and the headphones.
-
Page 40: Adjusting The Picture
Daily operation Adjusting the picture Explanations of the picture settings (continuation): Image + Active Picture improvement on/off and demo mode for Image + MENU: Call TV menu. Active. Select Picture, Auto dimming If this auto dimming is active then the television picture go to the menu line below. - Page 41 Daily operation Selecting the picture format Move picture vertically ➠ The picture format cannot be altered if an HbbTV ➠ In normal TV mode without other displays. application is active (see page 86) or if the TV set Move picture up/down. is in 3D mode (see page 43).
-
Page 42: 3D Function
3D. You will need to wear the 3D glasses to You require a pair of Loewe Active 3D Glasses to be able to use the 3D view it properly. - Page 43 Daily operation Picture format / 3D mode If 3D contents are recognised by the TV device, the picture format can- not be subsequently changed. The picture format when in 3D operation is always 16:9 PC. The 3D mode can be changed using the Picture Format button. Select the 3D mode.
-
Page 44: Dr Archive
Daily operation Button functions Coloured buttons in TV mode (continuation) Green button: Open the Teletext functions menu. Every operating mode of the TV set (TV, Radio, MediaPortal, Teletext, EPG, PIP, and DR archive) has its own menu and own functions for the coloured buttons. TELETEXT FUNCTIONS The function of the coloured buttons is shown at the bottom of the menus btitles... -
Page 45: Set Picture Format
Daily operation Operation without remote control Permanent display of time Press twice in rapid succession: Changing the station on the TV set Time is shown/hidden permanently. + / – Station up/down. Switching radio on or off or switching to radio Radio on or switch between TV and Radio. -
Page 46: Status Display
Explanations of the symbols in the status display: General symbols: ➠ In normal TV mode, without other displays. Display in 3D mode (use Loewe Active 3D Glasses, see INFO: Show status display. accessories on page 148). HbbTV mode is on and HbbTV applications are available... - Page 47 Daily operation Selection possibilities for DVB stations Other setting options for DVB stations Additional selection options are shown in the status display for the You can make general presettings for DVB stations under TV menu individual programmes (depending on the DVB programme provider). Settings Miscellaneous DVB settings.
-
Page 48: Managing Stations
Managing stations TV stations Explanations of some search settings: Set location Select the country for country-specific defaults and Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, station sorting. - Page 49 Managing stations Search for/update stations – handling of new and no longer found stations Search/update station – manual search / settings The number of new stations found is displayed after the automatic search/ ➠ If you want to adapt the parameters of an existing station, first select update has been completed.
- Page 50 Managing stations Change, delete, move, rename, restore station Delete station ➠ Change station can also be called via the station list ➠ Change station is opened (see left-hand column). (page 36). or numeric buttons: ➠ If at least one station is locked the access code must Select the appropriate station.
- Page 51 Managing stations Rename station Restore stations ➠ Change station is opened (see page 50). Stations which have been deleted from the station list can be restored. ➠ DVB stations for which the station name is also broad- ➠ Change station is opened (see page 50). cast cannot be renamed.
- Page 52 Managing stations Automatically update the station list at once The station list will be immediately updated. Normally this occurs in the background without interfering further If yes is selected to the option Accept Logical Channel Number when the with the TV‘s operation. In exceptional cases, it is initial setup is performed, then the network provider may change its however possible that during this process an automatic station list.
-
Page 53: Put Together / Change Favourites Lists
Managing stations Put together / change favourites lists Add station to favourites list ➠ All stations (left column) must be selected. Each favourites list can contain up to 99 stations. You can put together If not, change the list with the favourites lists to suit your requirements (e.g. -
Page 54: Picture In Picture
Picture in Picture Picture in Picture (PIP) iPIP The concurrent display of two different images is referred to as Picture Starting and ending iPIP mode in Picture. On pressing the PIP button the currently displayed TV Restrictions for the PIP mode: picture becomes the PIP picture. -
Page 55: Configure Picture In Picture (Pip) Mode
Picture in Picture Configure Picture in Picture (PIP) mode Change position of Small PIP ➠ Other than the status line, which may possibly be You can set different parameters for the picture in picture mode in the displayed, no other display is shown on the screen: PIP menu. -
Page 56: Electronic Programme Guide
Electronic Programme Guide Electronic Programme Guide – EPG Adjusting the programme list ➠ The selection is at the top of the specifications, EPG stands for Electronic Programme Guide and provides you with if not, press the blue button. on-screen programme details. With the system, as with a printed pro- gramme guide, you can learn about the current programme. -
Page 57: Configuring Epg
Electronic Programme Guide Configuring EPG Paging through the programme list P+/P– Page backwards / forwards. Start the EPG menu In the entries for Date and Time, you will see changes in ➠ EPG mode is started, time as well as in date when paging. Scrolling in the if not, press the EPG button. -
Page 58: Teletext
Teletext Teletext Additional page selection possibilities Your TV set supports the two operating systems TOP Text and FLOF. 1st possibility: Up to 2,000 pages are stored so that you have quick access. Call overview page 100. Starting and ending teletext 2nd possibility: TEXT: Call up teletext. -
Page 59: Teletext Menu
Teletext Teletext menu Programming timer recordings via Teletext ➠ Teletext is started, In the Teletext menu you can activate messages, reveal pages and con- if not, press the TEXT button. figure the teletext with the Settings menu function. Call the programme pages of the current station. Starting the Teletext menu Green button: Go to the appropriate page. -
Page 60: Digital Radio
Digital radio Radio mode (DVB radio) Station switching (DVB radio) ➠ The selection of the stations / favourites is the same as The TV set can receive digital radio stations over DVB or over the internet the procedure in TV mode (see pages 36 and 37). (see page 62). -
Page 61: Epg - Electronic Programme Guide (Radio)
Digital radio EPG – Electronic Programme Guide (radio) Radio menu In the Radio menu, you can set the sound, search for and store radio You can also use an electronic programme guide for the DVB radio sta- stations (automatically or manually), change stations and set switch off/ tions if the radio stations provide programme information. -
Page 62: Radio Mode (Internet Radio)
Digital radio Radio mode (Internet radio) Station list (internet radio) The TV set can receive digital radio stations over DVB (see page 60) or over the internet. INTERNET RADIO In addition you can play the sound from an external device through the Local Germany All stations by Location... -
Page 63: Audio Playback From External Devices
Digital radio Audio playback from external devices You can play the sound of external AV devices (e.g. MP3 players, DVD players) in radio mode. Connecting an external appliance (e.g. MP3 player) Connect the output (jack) of the MP3 player to the cinch audio in sockets L/R (white/red) of the TV set. -
Page 64: Other Settings
Other settings Parental lock Explanations of setting possibilities in the Parental lock menu: Lock all The TV set is locked immediately the menu is exited. All You can select and set various security options to prevent unauthorised use stations programmes can then only be watched after entering the of the TV set and to protect your children from unsuitable programmes. -
Page 65: Timer Functions
Other settings Timer functions Explanations of setting possibilities in the Timer functions menu: This menu offers you convenient alarm services. Programmed alarms are Wake up Specify whether the TV set switches on in the event of an also active when the TV set has been switched off to standby. alarm from the standby mode in TV or radio mode with with If the TV set switches on from the standby mode by alarm, a screen... -
Page 66: On-Screen Displays
Other settings On-screen displays Time and date You can select different settings in this menu which affect the on-screen If you receive a station with teletext after switching on the TV, the time displays. and date are recorded automatically. The date may have to be entered manually for some stations. -
Page 67: Coded Stations
For Loewe TV sets, CI slots can be built in with an ejector (A) or without Replace the cover. an ejector (B). In the case of CI slots with an ejector, this protrudes slightly out from the unit when the CA module is correctly installed. -
Page 68: Media
Media menu (see page 70). MediaUpdate - additional functions Your Loewe TV set supports the UPnP AV standard for data playback in Additional functions in the MediaPortal are planned, particularly for Loewe the home network. You can find more detailed information on this in the Media + . -
Page 69: Accessing Your Media
Media + Accessing your media Playing music and videos, displaying images The windows for playing music and videos and for displaying photos are comparable for all cases irrespective of the media source. The relevant MEDIA: Call MediaPortal. players are therefore grouped together: MediaMusic (including Internet radio): see page 82. -
Page 70: Media Menu
Wireless Internet access is possible (WLAN). Internet-enabled devices connected to the network socket (LAN) (e.g. Loewe MediaCenter, Loewe BluTechVi- sion Interactive) can use the wireless connection of the TV set to access the Internet via the WLAN bridge function. - Page 71 Media + Configuration of the built-in LAN adapter Configuration of a wireless adapter (e.g. WLAN bridge adapter) ➠ Adapter configuration is accessed over the media menu ➠ Adapter configuration is accessed over the media menu (see page 70). (see page 70). You will see an overview of the current settings for the You will see an overview of the current settings of the selected network adapter (for an explanation of the points,...
- Page 72 Media + Explanation of the adapter settings Explanation of the setting possibilities in Network settings menu (continued) The current assignment method for the IP address of configuration your TV set. Other This menu contains settings which have to be changed less frequently.
- Page 73 Media + Explanation of the setting possibilities in the Photo settings menu Explanation of the setting possibilities in the Video settings menu ➠ The menu can only be opened when a photo is displayed (see page 83). ➠ The menu can only be opened when the Video Player is displayed (see page 84).
-
Page 74: Mediahome
Media + MediaHome MediaCenter A Loewe MediaCenter connected to your home network. TwonkyMedia Examples with media servers in your home network. The MediaHome includes both storage media directly connected to the TV WMP11 exact designation depends on the media server used. - Page 75 Media + General navigation in the media overview Repeat procedure if necessary. The content of the selected folder is still displayed in the right ➠ The graphics on this page typically show a two-column list view. You window, the previous folder structure in the can switch between the views as required (see page 76).
- Page 76 Loewe_007 Loewe_008 Loewe_009 Loewe_010 Loewe_011 Loewe_012 When using a media server in your home network as a source (see :/Photo/LOEWE/Loewe_011 Elements 106 page 74), the names of the folders displayed are specified by the View Page (1/9) Change view media server.
-
Page 77: Medianet
Personal area Settings The upper section of the MediaNet basis dialog contains Loewe Recommendations. The middle section displays your own Favourites (Edit favourites, see page 80). Depending on the topic selected (see right column), all the available online content matching the topic is displayed in the lower section. - Page 78 Media + Internet Navigation in websites Green button: Call Internet. P+/P– Scroll the page vertically. MEDIA NET - INTERNET Select link or text input field, www.loewe.de| www. .org .com .net HISTORY OK open link or confirm text input. www.loewe.de <...
- Page 79 It appears encrypted Select Favourites entry, (****) when entering for security reasons. OK transfer the Internet address to the input line. MEDIA NET - PERSONAL AREA OK View the website. www.loewe.de| www. .org .com .net HISTORY www.loewe.de...
- Page 80 Media + Edit MediaNet favourites Change the sequence of MediaNet favourites The middle section of the basic MediaNet dialogue contains the MediaNet Select entry under Favourites. favourites. You can define and delete these favourites or change their sequence as desired. Green button: Move selected favourite.
- Page 81 Media + MediaNet settings Here, you can find more setting options for MediaNet. ➠ MediaNet is open (page 77). Blue button: Call Settings. MEDIA NET - SETTINGS Access code Personal area Country selection You can change your access code to your personal area here. * * * * Mentions légales Back...
-
Page 82: Mediamusic
Media + MediaMusic Explanation of the symbols in the playback window The symbols at the top right show you information about the current playback. ➠ A music title is highlighted in the media overview. Playback Pause LOEWE_USB (USB) Albums Title Rewind Ammonia Avenue Prime Time... -
Page 83: Mediaphoto
Media + MediaPhoto Slide show PLAY button: Start slide show. ➠ from photo overview: The slide show will begin with ➠ A picture is selected in the media overview. the marked picture. ➠ in full screen mode: Start slide show with displayed picture. -
Page 84: Mediavideo
Media + MediaVideo Playback ➠ A video is selected. OK Play highlighted video. ➠ A video is selected in the media overview. PAUSE button: Pause/resume current playback. LOEWE_USB (USB) PLAY button: Continue paused playback. Music video1.avi Photo video2.avi Video video2.wmv STOP button: Stop current playback and return to over- video3.avi video4.avi... - Page 85 Media + Wind Smart Jump You can fast-forward/rewind videos to search for desired scenes. If Smart Jump is activated, the jump width is halved every time you change the jump direction. The jump width is doubled if you jump more than three Rewind at double speed.
-
Page 86: Interactive Data Services
HbbTV applications are dependent on the provider. Under certain circumstances, the recording and bookmarking functions of the applications may not be supported. Loewe takes no responsibility for accessibility, functionality or content of HbbTV applications. Depending on the settings selected. - 86... - Page 87 Interactive data services HbbTV mode on/off Start behaviour of HbbTV-stations When the HbbTV mode is active (factory setting), additional services and If the setting HbbTV mode on has been selected (see left column), you further information (e.g. also from the Internet) can be viewed if these can specify if an available HbbTV application should be loaded automati- are offered by the current station.
-
Page 88: Mhp
➠ MHP is only available for some channels in Italy via DVB-T. The device location must be set to Italy. ➠ You will need a Loewe MHP stick (USB stick with MHP software) to use MHP. In the case of TV sets for the Italian market, this will be inserted... -
Page 89: Mheg-5
The appearance, key assignment and available functions of the MHEG-5 applications are dependent on the provider. Loewe takes no responsibility for the accessibility, functionality or content of MHEG-5 applications. Opening MHEG-5 teletext If no message appears informing you of how to switch to digital teletext when you change channel, press the TEXT button. -
Page 90: Digital Recorder
About the Digital Recorder system You can record stations on the integrated hard disc of your TV set with the digital recorder of your Loewe TV set (DR + ). The Digital Recorder can also process HDTV signals including the audio and auxiliary signals that they contain. - Page 91 Digital Recorder TV viewing with time shift Digital Recorder archive In the case of devices with an integrated hard disc, the Digital Recorder You can record movies you want to watch later in the Digital Recorder‘s records the TV programme you are currently watching in the background archive.
-
Page 92: Technical Information
113. Also follow the information for formatting on page 113 when using an external USB disc. Loewe is not liable for the loss of data on the integrated hard disc (DR + ) There are three different speeds for winding and rewinding films. -
Page 93: Settings
29.07. 3sat Individual Jump distance Set the standard jump width (in minutes) used for jumping 00.00. LOEWE. forwards or backwards in the film by pressing Use the numeric buttons on the remote control to enter 09:45 - 10:00 the time (always two-digit for 01 to 15 min.). - Page 94 This minimizes the risk that a part of the broadcast is not recorded due Using the DR archives of other TVs to the broadcast starting earlier and/or finishing later. DR device name LOEWE TV DR device group name Home IP port number 17123 MENU: Call TV menu.
-
Page 95: Tv Viewing With Time Shift
Digital Recorder TV viewing with time shift Switch to live picture Press STOP button. The Digital Recorder continuous operation is switched on as the factory You see the station’s live picture again. default setting (see page 93). In this case, the TV broadcast that you wish to view is automatically recorded in the background. - Page 96 Digital Recorder Fast forward and rewind Highlight function During time shift viewing you can fast forward and rewind at three dif- You can mark interesting scenes in sports reports for example to watch ferent speeds. Sound is not audible during winding. these again specially at a later viewing.
-
Page 97: Archive Recording - Direct Recording
Digital Recorder Archive recording – Direct recording ➠ When the start of the broadcast has been recorded, the broadcast will be adopted from the beginning (only when DR continuous operation ➠ For recording encrypted broadcasts, please also refer to the informa- is activated, see page 93). - Page 98 Digital Recorder Watching other stations during archive recording Stop recording early After you have started the recording, you can switch to another station. You can end a current archive recording prematurely. ➠ The second channel can be watched in delay TV whilst a recording is Press STOP button.
- Page 99 31.08. Das Erste Recording type once only Tagesschau Record subtitles 29.07. 3sat Individual Parental lock 00.00. LOEWE. confirm Set delete protection Check the timer data and change it if necessary. 09:45 - 10:00 Detail View Edit/protect OK Confirm timer data. The broadcast is entered into...
- Page 100 Digital Recorder Programming a timer recording via teletext Programming a timer recording manually Call the station on which you want to make a timer recording. Call DR archive. TEXT: Call teletext. Red button: Call Timer list. If HbbTV is offered by the channel, then the MediaText/ HbbTV text opens up (see page 86).
- Page 101 Digital Recorder ➠ If a DVD recorder was selected as a recording source, start playing Explanations of the setting options in the Timer data menu (continued) the connected device manually from the beginning of the entered Decoding (only with presetting Descrambled recording no).
- Page 102 To avoid data loss, we recommend copying important recordings to a rewritable DVD. Delete the recordings from the Digital Recorder after copying. Loewe is not liable for data loss from the Digital Recorder’s hard disc. Record conflict If you wish to programme a new recording which overlaps an timer...
-
Page 103: Archive Playback
➠ The CA module with Smart Card must be plugged in when playing Tagesschau 29.07. 3sat recordings which are still coded. Individual 00.00. LOEWE. Setting bookmarks 09:45 - 10:00 While playing an archive recording, you can set bookmarks. Detail View... - Page 104 Digital Recorder ➠ When playing coded recordings, some of the following functions Smart Jump might only be possible with limitations. Smart Jump allows you to search quickly for certain scenes of a recording. You will find more about this on page 95. Playing highlights If there are manually set bookmarks in the current playback, they can be Fast forward and rewind...
- Page 105 Digital Recorder Deleting parts of the recording Hiding sections of the recording You can delete sections of a recording from the current position within You can hide sections of an archive recording. The hidden parts are the film to the beginning or to the ending. skipped in the future playback and when copying to a connected recorder.
- Page 106 14.09. Phoenix da capo Yellow button: Call Delete/hide. 31.08. Das Erste Tagesschau 29.07. 3sat da capo Individual 00.00. LOEWE. 00:00 00:52 01:03 Delete from here to start Set hiding start 09:45 - 10:00 Delete from here to end Delete bookmark...
- Page 107 You can also copy programmes onto a external hard disc, and archive You can start descrambling scrambled recordings manually at any time them or make them available to other Loewe LCD TV sets (even those The CA module with the smart card must be inserted at the time of de- without DR + ).
- Page 108 Bon(n) jour Berlin 14.09. Phoenix da capo 31.08. Das Erste Tagesschau Delete bookmarks 29.07. 3sat Individual 00.00. LOEWE. ➠ DR archive is displayed. Select the recording for which you want to delete 09:45 - 10:00 the bookmarks. Detail View Edit/protect...
- Page 109 Edit/protect 31.08. Das Erste Top-Movie 1 Tagesschau 15.09. Sky Cinema HD 29.07. 3sat Bon(n) jour Berlin Individual 14.09. Phoenix 00.00. LOEWE. da capo 31.08. Das Erste Tagesschau 09:45 - 10:00 29.07. 3sat Individual Detail Parental lock TEXT 00.00. LOEWE.
- Page 110 ** **** 31.08. Das Erste Select the title for which you want to set/cancel a Tagesschau 29.07. 3sat delete protection. Individual 00.00. LOEWE. Yellow button: Set/Cancel delete protection. The parental lock is active. Detail View Parental lock TEXT Select others if necessary.
-
Page 111: Dr+ Streaming
112). 20.08. Sat.1 Tagesschau 19.08. Das Erste HD ➠ To use DR + Streaming, at least two Loewe TV sets are required with SL heute 19.08. ZDF HD 1xx chassis (at least one of which has an integrated Digital Recorder). - Page 112 14.09. Phoenix be disconnected from the mains! Copying will otherwise be interrupted da capo and the recording may then be unusable. 31.08. Das Erste Tagesschau 29.07. 3sat Individual 00.00. LOEWE. Detail View Edit/protect TEXT Delete/copy Timer list Change sorting To play accessible broadcasts on other TV sets, see page 111.
- Page 113 Digital Recorder Checking the hard disc Formatting the hard disc You can check the integrated hard disc of the TV set, e.g. if problems If problems were detected when the hard disc was being tested (see left with the Digital Recorder function occur. column), re-formatting may be able to remedy the problem.
-
Page 114: Further Information
Digital Recorder Further information DVB Common Interface standard (CI) VPS and automatic time control If a programme has been recorded coded, the decoding process is carried Your TV set can use the supporting technologies VPS (Video Programming out automatically the next night in the standby mode (when timer data System) and automatic time control for recording a broadcast. - Page 115 Digital Recorder DVB Common Interface Plus standard (CI Plus) CI Plus is an advanced development of the DVB Common Interface Software update for CI Plus capable CA modules Standard. CI Plus slots are in principle downward compatible to the Every now and then, there will be new system software for your CA previous CI standard, i.e.
-
Page 116: External Devices
External devices Connections menu AV connection settings Settings for the connection of external appliances are made in this menu. In the AV connection settings menu the parameters for the AV and AVS connection sockets can be adapted. Calling the connections menu Calling AV connection settings MENU: Call TV menu. -
Page 117: Av Selection
External devices Connections – Miscellaneous Gaming mode Various settings (e.g. Digital Link, Decoder etc.) in connection with ex- For the inputs of your TV set on which game consoles, PC applications ternal appliances are made in this menu. or even Karaoke machines are operated, we recommend you to activate the Gaming mode. -
Page 118: Devices To The Connections Av/Avs
External devices Devices to the connections AV/AVS Connecting a DVD player to the TV set ➠ A DVD player has been selected in the TV Menu under Connections An additional appliance such as a DVD player, VCR/DVD recorder etc. can AV connecting settings Device at connection AV (see also page 116). - Page 119 External devices Connecting a DVD recorder to the TV set Connecting Camcorder/camera Switch off all equipment before connecting. ➠ A DVD recorder has been selected in the TV Menu under Connections AV connecting settings Device at connection AV (see also page 116). Connect the AV output of the camcorder to the sound input sockets AUDIO IN L (white) and AUDIO IN R (red) and the AVS connection of the Switch off all equipment before connecting.
-
Page 120: Devices To The Hdmi Connections
PC IN Your TV set can show 24p films, which are output from a connected VIDEO HDMI player (e.g. Loewe BluTech Vision Interactive) optimally (see glos- Switch to ... sary, page 155). Digital video signals from a DVI player can be also be reproduced by the Select HDMI socket. -
Page 121: Digital Link Hd
HDMI connection of a put signal at your PC beforehand so that it corresponds to one of the TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. You signals in the table on page 145. -
Page 122: Devices To The Pc In Connection
PC IN socket of the TV set using a VGA adapter. The VGA adapter is If this is not the case, connect the analogue or digital sound as described available as an accessory from your Loewe dealer. above. See the appropriate operating manual for further information The other units are connected as described in the left column. -
Page 123: Sound Components Wizard
TV sound. For sound reproduction, you can configure the TV loudspeakers, active loudspeakers, loudspeaker systems, Loewe Individual Sound Projector SL as well as analogue and digital HiFi/AV amplifiers. TV sets that are equipped with an integrated digital multi-channel audio decoder can output sound signals with up to six channels (5.1 surround... -
Page 124: Connecting Loewe Sound System
This guarantees a natural spatial image of the sound. ➠ If you have connected speakers directly to the TV set (Connecting sys- Subwoofer tem speakers; e.g. Loewe Stereospeaker I 40/46 Sound or at the screw Left Subw Right terminals), you can use these as front or center speakers depending... -
Page 125: Connecting Active Loudspeakers
External devices Connecting active loudspeakers Adjusting the speaker system If you want to use another similar speaker system or active speakers, Calling the sound components wizard you can connect these to the AUDIO LINK interface of the TV set with ➠... - Page 126 External devices If you want to set up or change a speaker system: ➠ Select the start value of the frequency response of the speakers for the right setting (e.g. 50Hz for the Select Configuration/modification, specification “Frequency response 50-20.000Hz”). See OK call selection.
- Page 127 External devices OK continue to set the OK continue to Subwoofer phase. Distance to left front speaker. SOUND COMPONENTS WIZARD ➠ Measure the distances from your listening position to Here you can reverse the phase of your subwoofer. Test both values in music reproduction and then select the one with which you get a better the front, surround, and centre speakers respectively.
-
Page 128: Connecting Audio Amplifiers
External devices Connecting audio amplifiers Connecting digital audio amplifiers Continuation of the left column above ... The sound components wizard permits configuration of different audio For digital audio transmission: Select yes. amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). -
Page 129: Assignment Of The Digital Audio Input
Serial interface RS-232C (RJ12) AUDIO DIGITAL IN socket on the TV set. You can connect either the Loewe Individual Sound Projector SL or a home Connection example for a DVD player, see right hand network system of different manufacturers (e.g. AMX, Crestron) to your column. -
Page 130: The Direct Way To Record
External devices The direct way to record Entering the Timer data After selecting the station you wish to record, timer data You can programme timer recordings via the integrated Digital Recorder (if will be displayed. installed) or connected recorders on the TV set. The recording wizard is in- The setting options for the timer data differ depending tegrated at several places for programming a recording. - Page 131 External devices Programming the timer with the timer overview New entry: Programme timer recording manually All programmed recordings, marked programmes and copy orders are listed ➠ Timer list is opened. in the timer overview. You can also programme new recordings, mark other Red button: Call New timer entry.
-
Page 132: Timer Recording With External Devices
External devices Timer recording with external devices ➠ The recording of HDTV stations with external devices is only possible to a limited degree. The HD transmission is scaled down to SD quality and output at the AV output for the recording. Recorder with Digital Link Plus If you use an externally connected recorder with Digital Link Plus or a similar system, the TV set and connected recorder exchange data (e.g. -
Page 133: Operating Loewe Equipment
Operating Loewe equipment Setting the remote control for other Loewe devices You can operate various Loewe devices with the remote control. The device keys REC – DVD – AUDIO can be reassigned to operate various Using the remote control for the TV mode of the TV set Loewe devices. -
Page 134: Software Update
Requirements of USB stick of the set or can be seen under TV equipment in the index of the TV set USB sticks tested by Loewe and compatible in type and format can be (see page 17). ordered from the Loewe dealer using the article no. 90456.900. -
Page 135: Software Update Via Usb Storage Device
Software update Software update via USB storage device New software package found To do this, insert the USB stick with the downloaded software (see SOFTWARE UPDATE WIZARD Software package: current V6.1.0 new V6.2.0 page 134) into a free USB port on the TV set (see connections page 11). If you want to load the new software now please press . -
Page 136: Software Update Via The Internet
Software update Software update via the internet If you are not in agreement with the relevant data being passed on, If an internet connection is available, new software can be downloaded END: leave the update process. directly and installed onto the TV set. The update will then not be carried out.. - Page 137 Software update Load new software package Only the parts of the software package that are not up to date will be automatically downloaded from the internet and updated. Each part of the software is downloaded individually from the internet and is then programmed. The total time required for all the software parts to be downloaded from the internet is dependent on the speed of data transfer that is being used.
-
Page 138: Input Of Characters
Input of characters USB keyboard Button combinations You can connect a USB keyboard to one of the USB ports of your TV set Keyboard Remote control and use it in place of a remote control. With it, you can type internet Left and right Keyboard layout between Standard (Latin) and addresses more comfortably into the browser and you can type char-... -
Page 139: Character Table
Input of characters Character table Key assignment for text input via the remote control For certain functions the input of letters or characters is required. As with a cell phone press the numeric button (0-9) repeatedly until the desired character appears. ➠... -
Page 140: Rotating The Tv Set
Your TV set has a connection for a rotating stand control. If the set is switched off. In order for the TV set to return to the determined switch- mounted on a motorised Loewe stand, you can use the remote control off position when switching it off, this must be activated (see below). -
Page 141: Troubleshooting
Wait until the timer recording ends or delete the called (displayed in grey). timer recording (page 131). The control functions of the Loewe a) The Digital Link function is not activated or a) Activate Digital Link in the recorder (see operat- Recorder and the Timer are not working not possible in the recorder. - Page 142 Troubleshooting Problem Possible cause Remedy No sound via the external digital audio a) The external digital audio amplifier does not a) Set PCM stereo on the DVD player in the amplifier. support the selected sound format (Dolby sound selection. For DVB stations on the TV Digital, dts, MPEG).
- Page 143 Troubleshooting Problem Possible cause Remedy If a desired IP address has been specified then No DHCP server is working on your network. Set up a DHCP server. no IP address will be automatically issued to Assign the IP addresses for the TV set manually. your TV set.
-
Page 144: Technical Data
Technical data General data Individual 55 Individual 46 Type Compose 3D Compose 3D Article number 50432xxx 50431xxx Device dimensions without stand (W x H x D) in cm 132.6 x 80.4 x 6.0 113.3 x 69.2 x 6.0 Weight without stand (approximate) in kg 36.8 27.5 Display technology... -
Page 145: Electrical Data
Technical data Electrical data Signals via PC IN / HDMI The following table lists the compatible signals which your TV set can Chassis designation: SL 150 / SL 151 show via the PC IN connection and the HDMI connections (HDMI1, HDMI2, HDMI3). -
Page 146: Connections (Max. Equipment)
Speaker Right: + (red) / - (black) Screw terminals (2x) Speaker Left: + (red) / - (black) + L - 10-pole connector Loewe system speaker HDMI type A (3x) Digital Video/Audio IN: Digital video and audio D-SUB 15-pole Video IN:... -
Page 147: Mediahome
Technical data MediaHome File formats supported Media server software Pictures: JPG, PNG, GIF To play multimedia contents from devices in your home network, you require media server software which makes the relevant files available Audio: MP3, M4A (AAC LC), WMA (without lossless), FLAC, WAV (PCM) to you. -
Page 148: Accessories
With the Loewe Blu-ray player BluTech Vision Interactive 3D you’re fully Loewe Stereospeaker I 40/46 Sound: kitted out to watch Blu-ray discs with 2D and 3D material. With the Loewe Extend your Individual with the system speaker Stereospeaker I Sound system integration you control BluTech Vision Interactive 3D and your Loewe TV set simultaneously using the Assist remote control. -
Page 149: Upgrade Kits / Conversion Kits / Cables
The Standard DVB-T2 is not available in all countries at the moment The retrofit possibilities for your set can be found in the table on page 150. Adapter and Cables: AUDIO LINK adapter cable 0,25 m Loewe Art.No. 89954.001 AUDIO LINK cable 1,5 m Loewe Art.No. 89952.001 AUDIO LINK cable Loewe Art.No. -
Page 150: Equipment Variants
Accessories Equipment variants The equipment of the individual set variants and their upgrade/conversion possibilities is listed in the table below. Set variants Individual 55 Individual 46 Individual 40 Individual 32 Compose 3D Compose 3D Compose 3D Compose Sound 3D Stereospeaker I Sound DR + DVB-T/C Twin Digital audio decoder... -
Page 151: Setup Possibilities Individual 55 / 46 / 40
Accessories Setup possibilities Individual 55 / 46 / 40 Individual 55 Compose 3D Wall Mount (WM62) Wall Mount Flex 52 L Table Stand I 55 Floor Stand I 55 Floor Stand I 55 SP Center Floor Stand I 40-55 Screen Lift Plus Rack 110.30... -
Page 152: Setup Possibilities Individual 32
Accessories Setup possibilities Individual 32 Individual 32 Compose Sound 3D Wall Mount (WM62) Table Stand I 32 Sound Floor Stand I 32 Floor Stand 8 32-40 Table Stand I 32 Sound Wall Mount (WM62) Screen Lift Plus Rack 110.30 Rack 110.30 SW Rack 165.30 Rack 165.45 CS Rack 165.45 SP... -
Page 153: Environment
Environment Environmental protection Energy consumption Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see Technical data on page 144). If you want to save even more energy then switch the device off with the mains switch. -
Page 154: Legal Notes
PORT especially without an implicit guarantee of MARKET MATURITY or DTS, Inc. All Rights Reserved. APPLICABILITY FOR A CERTAIN PURPOSE. Details can be found in the GNU General Public License. You can order the software from Loewe Customer Service. You can download the GNU General Public License here: http://www.gnu.org/licenses/. -
Page 155: Glossary
Digital Link: System for controlling recorders (for video and DVD recorders soft Windows and OS/2 that is wide spread and therefore supported by from Loewe) via the Euro AV sockets of the Loewe TV set with concealed almost every popular graphics software package without any problems. - Page 156 DNS: Abbreviation of Domain Name System. Readable names (e.g. www. Electronic Programme Guide: See EPG. loewe-int.de) are assigned to numerical IP addresses. DNS servers are EPG: Electronic Programme Guide is the electronic variant of a printed responsible for the resolution of readable addresses into the correspond- TV guide.
- Page 157 IR-Link: The IR-Link function allows the operation of accessory devices Multimedia contents: Videos, music files and photos are grouped together with concealed installation made by other manufacturers via the Loewe under this term. TV set. The infrared sensor required for this is available as an accessory and can be connected to the IR-Link connection of the TV set.
- Page 158 Glossary Signal input groups (continuation): P (continuation) Progressive JPEG: Progressive JPEGs are built up gradually. The quality of Signal type: RGB the picture increases progressively during the loading process. (PC modes: e.g. 800x600, 1024x768, 1280x1024, 1360x768) ProScan/Progressive Scan: Progressive Scan (abbr. PS) or full picture Input: PC IN method is a technique in the picture build-up of monitors, TV sets,...
- Page 159 Glossary VGA: PC interface for connecting a monitor. VPS: The Video Programming System (VPS) is a signal which some (but not all) analogue TV stations transmit in the blanking gap. The signal is used by video and DVD recorders when recording programmes to react to delays in start time, programme changes and excesses of the planned programme time.
-
Page 160: Ec Declaration Of Conformity
EC Declaration of Conformity Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EG. Es darf in allen Ländern der EU sowie zusätzlich in Island, Norwegen und der Schweiz betrieben werden. In Frankreich und Italien ist die Nutzung nur in Innenräumen zulässig. - Page 161 EC Declaration of Conformity 161 -...
-
Page 162: Index
Index Change favourites lists .......53 Descrambling at DR continuous operation ..93 Add station ..........53 3D .............40 Device at connection AV ......116 Delete station .........53 3D function ..........42 Digital audio input ........129 Move station ..........53 3D mode ...........42 Digital camera ..........118 Rename list ..........53 24p format ..........120 Digital Link HD (HDMI CEC) ......121... - Page 163 Index MediaNet ..........77 Picture in Picture ........54 Favourites ........77, 80 HbbTV ............86 PIN ............64 Internet ..........78 HDMI ............120 PIP .............54 Personal area ..........79 HDMI CEC ..........121 Playing highlights ........104 Recommendations ........77 Headphone volume........38 Programme info .........44 Settings ..........81 Help ............17 Proxy server ..........72 Topic selection ........77 Hiding sections ........105...
- Page 164 Index Slow motion ........96, 104 Timer recording......... 99, 130 manually ..........100 Smart Card..........67 via EPG ...........99 Smart Jump......85, 93, 95, 104 via teletext ...........100 Software download .........134 TOP ............58 Software update ........134 Top/bottom..........42 Sound ............38 TOP table ...........58 Sound components wizard .......123 TV button .........
-
Page 165: Service
Tel +40 - 21 200 64 64 Tel +27 - 1 14 66 47 00 Fax +40 - 21 200 64 65 Fax +27 - 1 14 66 42 85 E-mail:gina.surghila@avitech.ro E-mail: loewe@mad.co.za © by Loewe Opta 19.01.11 165 -...