Loewe Connect ID 46 Operating Instructions Manual page 110

Connect ID 32-46
Operating instructions
Digital Recorder
DVB Common Interface standard (CI)
If a programme has been recorded coded, the decoding process is
carried out automatically the next night in the standby mode (when
timer data settings do not differ). Please note that the TV set may not
be switched off at the mains overnight and that the CA module with
SmartCard must be inserted in the CI slot of the TV set.
If the recording is not decoded fairly soon after decoding, it may not be
possible to decode it at all. The longer the time between recording and
decoding, the greater the probability that the code is no longer valid.
➠ Scrambled hard disc recordings appear in the timer list until they are
descrambled (page 95).
➠ You can also start decoding manually (see page 103).
➠ Your programme provider may not support later (time offset) de-
scrambling.
You can have programmes from scrambled stations descrambled al-
ready in DR continuous mode. This saves you having to decode directly
recorded scrambled programmes later. An appropriate CA module with
SmartCard must be inserted in the TV set's CI slot for this.
➠ The playback of encrypted programmes is strongly dependent on
which CA module is used. The playback of encrypted recordings may
sometimes not be possible, or only to a limited extent.
Hint: When possible, record unencrypted programmes or unencrypt
them as soon as possible.
➠ Selection possibilities in the CA module menu and performance
capability of your CA module depend on the type of module used
and the installed software. Consult the manufacturer of the module
if you have any questions.
- 110 -