Selecting Audio/Video Source - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
Daily operation
Select station via favourites list
You can save your favourite stations in 6 favourites lists (e.g. for multiple
users). Each favourites list can contain up to 99 stations. After initial
installation, 10 stations from the station list are already stored in the
first list. Change the favourites list to suit your requirements (see Put
together / change favourites lists on page 49).
➠ In normal TV mode, without other displays:
OK calls the station list.
Red button: Calls up the last used favourites list.
FAVOURITES
FavouriteList 1
Switch to ...
OK
P+/P– Scroll in the pages of the favourites list.
Select station directly with numeric buttons. Or:
Mark stations.
Select other favourites list.
OK The marked station is called.
➠ Other favourites lists can only be selected if these
contain stations.
Red button:
Green button: Scan all stations of the currently
Yellow button: Change the Favourites lists, see page 49.
Explanation of the favourites lists:
The selection made with the red button (favourites list) is retained until
you switch back to the station list with the red button.
If favourites are selected, the name of the favourites list appears in the
status display after the station name after changing stations.
Explanation of the icons following station names:
DVB-T station (digital terrestrial via antenna)
DVB-C station (digital via cable)
DVB-S station (digital via satellite)
Coded station
v CI Plus coded station
Locked station (see Parental lock on page 60)
Back to the station list.
selected favourites list.
- 33 -

Selecting audio/video source

Select the AV source via the AV selection
➠ In normal TV mode, without other displays:
Call AV selection.
AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
Switch to ...
OK
OK switch over.
If the selected AV source provides a signal (picture), it
should be visible now.
For the VIDEO selection the set switches to programme
place 0 (signal source antenna/cable (analogue), factory
setting channel E36). The TV set shows the signal of a
provider via antenna (see page 115). The channel can
be changed as required (see page 45).
Select the AV source via station list
➠ In normal TV mode, without other displays:
OK Call the station list.
The connections are always at the beginning of the list
in numerical sorting.
The connections are sorted into the list in alphabetical
order in alphabetic sorting.
P+
P–
OK Switch over.
Select desired connection,
If the favourites list is displayed, switch to the
station list first.
STATION LIST
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
0 VIDEO
OK
21:00-21:45 Urlaubsparadies - Toskana
Switch to ...
OK
Select station
a - z
Favourites
Select connection.
PIP scan
Change stations
Sort alphabetically