Loewe Connect ID 46 Operating Instructions Manual page 90

Connect ID 32-46
Operating instructions
Digital Recorder
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without auto time control (DVB). This minimizes the risk that a part of
the broadcast is not recorded due to the broadcast starting earlier and/
or finishing later.
MENU: Call TV menu.
Choose Recording,
switch to the menu line below.
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
list Pre-record time
00 min (0 - 15)
Set pre-record or post-record time,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time).
Factory setting: pre-record: 01 min, post-record: 05 min.
only for TV sets with DR + .
(1
- 90 -
Post-record time Recording wizard
DR+ Streaming settings
DR+ STREAMING SETTINGS
Share the DR archive with other TVs
Using the DR archives of other TVs
Notify started "Follow me" recordings
DR device name
DR device group name
IP port number
DR standby
Share the DR Enter here whether recorded broadcasts within your TV
archive with set's DR archive are to be accessible for viewing from
other TVs other TV sets (server function).
(1
Enabled programmes can also be played on other UPnP-
AV clients in the same network.
Using the DR Setting yes enables you, via the archive, to also view
archives of recordings from other TV sets that have accessible films
other TVs within the home network (client function).
Notify started Your TV set can issue a message if a follow-me recording
"Follow me" has been started on another TV set (see page 108),
recordings which you can view on this TV set.
DR device
in DR + Streaming.
name
(1
DR device Give a name for your TV set group.
group name Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
name can exchange data.
IP port numbers are preset ex-factory. Under normal
IP port
number circumstances they do not require amending.
DR standby (1 Set here how long your TV set is to continue to give
MediaPortal.
This stand-by period is also activated as soon as data
exchange to another TV set has been completed.
yes no
yes
no
LOEWE TV
Home
17123
2 hrs
DR+ Streaming within the