Loewe Connect ID 46 Operating Instructions Manual page 37

Connect ID 32-46
Operating instructions
Daily operation
Selecting the picture format
➠ The picture format cannot be altered if an HbbTV
application
is in 3D mode (see page 39).
Press the Picture format button until the desired picture
format is set or press
Picture format
Panorama
4:3
to select the desired picture format.
The Panorama picture format can be set between
proportionally correct and format filling display. Black
bars are visible on the left and right of the picture in
the proportionally correct display.
Switch: Keep the M button on the TV pressed, at the
same time, press the Picture format button on the remote
control briefly.
Reset: Press the same button combination again.
Explanations of the picture formats:
➠ The setting options depend on the transmitted picture
content.
16:9 Proportionally correct display of 16:9 broadcasts.
4:3 Proportionally correct display of 4:3 broadcasts.
Panorama Proportionally correct or format filling display (as-
delivered state) of 4:3 broadcasts on the 16:9 screen.
Station logo and subtitles remain visible.
See above for switching the Panorama mode.
Zoom Proportionally correct display. Maximum picture magni-
fication.
PALplus Is a 4:3-compatible 16:9 picture broadcast supplied by
the station which is detected automatically.
If a high resolution video signal is displayed on the TV
set or fed in via the interfaces PC IN, HDMI1, HDMI2 or
HDMI3, the picture formats 16:9 PC, 16:9 TV, 16:9
Zoom, 4:3 PC, 4:3 TV and 4:3 Zoom can be set.
In the PC formats, the complete picture content will be
shown. In the TV formats a small part of the picture is
cropped. This may be necessary to hide possible interfer-
ence at the edge of the picture, which arises from the
signal supplied.
Abhängig von den gewählten Einstellungen.
(1
is active (see page 82) or if the TV set
(1
Zoom
- 37 -
Move picture vertically
➠ In normal TV mode without other displays.
To show subtitles or news tickers which have been cut
16:9
off, the picture can be moved up or down in the picture
formats Panorama and Zoom (not with high resolution
signal) with the arrow buttons
Presettings / Personal settings for picture adjustment
MENU: Call TV menu.
OK Confirm selection.
Explanations for Picture adjustment:
If you select Presettings, the picture settings for the signal input group
currently active are set to predefined values. See Glossary for an expla-
nation: Signal input groups.
Your own settings for contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise suppression are saved in the
personal values. At the same time, you have your own personal values
for each signal input group.
All picture and sound adjustments can be reset to the default values
in one step for all signal input groups in the index of the TV set under
Reset picture/sound or Factory settings picture/sound.
Move picture up/down.
Move picture up/down Bild vert. verschieben
2
Select Picture,
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
TV MENU
Picture
Picture adjustment
Presettings (TV digital) Personal settings (TV digital)
Home Mode ...
Select Presettings or Personal settings.
For presettings, go to the menu line below.
Select the desired presetting for the picture.
.