Installing The Remote Control Devices; Adjustment 9 - TOHATSU M 60C Owner's Manual

3. Installing the remote control devices

�������
!
When using other than Tohatsu's
genuine remote control box, DO NOT
select the one without neutral safety
switch that prevents in-gear start.
Use of remote control box without
neutral safety switch can allow start
of engine with gear at other than
neutral shift, potentially leading
passengers to falling or causing
passenger to be thrown overboard.
It is recommended that you consult
w i t h y o u r a u t h o r i z e d d e a l e r f o r
installation adjustment of the remote
control device.
■ Installation of the Remote Control
Cables (Box side) :
F o l l o w th e i n s t r u c t i o n ma n u a l
provided with the remote control.
■ Installation of the Remote Control
on your boat :
F o l l o w th e i n s t r u c t i o n ma n u a l
provided with the remote control.
■ Installation of the Remote Control
Cable (engine side) and the Cord
Assembly (Wiring Harness) :
60C/70C
1 Detach the bracket and set cord
assembly B and the remote control
cables in position.
After fixing the remote control
cables to the bracket, re-secure the
bracket to the lower cowl.
�������
!
Be careful not to loop the remote
control cables to a diameter of
406 mm (16 inches) or less.
21
INSTALLATION
3