24
INSTALLATION
4 Move the remote control lever to
the "FORWARD" "NEUTRAL" and
"REVERSE" positions to confirm
that the shift is working properly,
then set the lever to "NEUTRAL".
3
�������
!
Do not disconnect the cord assembly
when the outboard motor is in
operation or you will lose control of
the outboard motor.
120A2, 140A2
1 Detach the upper engine cover.
2 Detach the upper grommet cord
clamp bolt.
3 Detach the throttle and shit cable
joints by removing the R-pins.
4 Move the remote control lever to
the "FORWARD" "NEUTRAL" and
"REVERSE" positions to confirm
that the shift is working properly,
then set the lever to "NEUTRAL".