TOHATSU M 60C Owner's Manual page 23

5 Adjust the cable joints until the hole
of each is aligned with the advancer
arm pin.
After adjustment, lock each cable
joint with the nut and secure it with
the R-pin.
6 Connect cord assembly B to cord
assembly A
Connect the pink and light-blue
leads from cord assembly A and B
together.
�������
!
Do not disconnect the electric
couplers while the engine is running,
as this will damage the C.D. unit and
could result in a serious electric shock.
90A2
1 Detach the upper engine cover.
2 Detach the upper grommet cord
clamp bolt.
3 Detach the throttle and shit cable
joints by removing the R-pins.
�������
!
Be careful not to loop the remote
control cables to a diameter of
406 mm (16 inches) or less.
23
INSTALLATION
3