Installing The Remote Control Devices - TOHATSU M 6B Owner's Manual

16
INSTALLATION

2. Installing the remote control devices

It is recommended that you consult
w i t h y o u r a u t h o r i z e d d e a l e r f o r
installation adjustment of the remote
control device.
■ Installation of the Remote Control
Cables (Box side) :
3
Fo l l o w t h e i n s tr u cti on m an u al
provided with the remote control.
■ Installation of the Remote Control
on your boat :
Fo l l o w t h e i n s tr u cti on m an u al
provided with the remote control.
■ Installation of the Remote Control
Cable (engine side) and the Cord
Assembly (Wiring Harness) :
1 Fitting of holder cap and sleeve B
guide
Throttle side......Fit the holder cap
to the end of the cable and fix it
by the nut.
Holder
cap
Spring
Ball Washer
holder
Nut
Throttle cable
Shift side......Fit the sleeve B guide
to the end of the cable and fix it
by the nut.
Sleeve B guide
Lock pin
Nut
Spring
Spring pin Shift cable
2 Fitting of Remote Control Cable to
Engine
Throttle side......Set the throttle
cable to the cable clip and then
connect the holder cap to the ball
joint of throttle lever.
Shift side......Set the shift cable to
the cable clip and then insert the
lock pin at the shift lever fitting
hole and turn it 90° to lock it.
Cable outer
groove
Cable outer
groove