TOHATSU M 60C Owner's Manual page 57

Hide thumbs Also See for M 60C:
Table of Contents

Advertisement

EFTO, EPTO Type
Tilt up
1 Disconnect that fuel connector
from the engine.
2 Operate the Power Trim & Tilt
switch and tilt the engine up.
DOWN
UP
UP
DOWN
UP
DOWN
3 Lock the tilt stopper.
If the outboard is leaving in the tilt
up condition without locking with
the tilt stopper, the outboards
may be tilted down.
Tilt stopper
Trim rod
ENGINE OPERATION
4 Operate the Power Trim & Tilt
switch to DN to retract the trim
rods.
If the trim rods are not retreacted
shells and other foreign matter
may stick to the rods, and could
cause damage when the rods
are later retracted.
�������
!
• Do not put hand or finger in
between outboard motor body
and clamp bracket when adjusting
trim angle to prevent injury in case
the outboard motor body falls.
• When tilting up outboard motor
with fuel joint for over a few
minutes, be sure to disconnect
fuel hose or close fuel cock, or
fuel may leak, potentially catching
fire.
�������
!
Do not tilt up outboard motor
during operation, or engine may be
damaged from overheating due to
lack of sufficient cooling water.
57
Tilt stopper
Trim rod
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 70cx

Table of Contents