Installing The Steering Handle And Main Switch Box - TOHATSU M 60C Owner's Manual

7. Installing the Steering Handle and Main Switch Box

MFG/EFO/EFTO types
1 Connect the throttle cable coming
from the motor to the handle, then fix
it with a nylon nut. After that, place
the plate in the outer groove, and fix
it with screws.
Throttle cable
Screw
Screw
2 Install the steering handle to the
motor with two bolts.
Handle B
Bushing
Plate
Bolt
Plate
Handle
Nylon nut
Bolt
Handle
Friction bolt
3 Install the main switch box at a place
where the driver is able to operate
the switches easily. And confirm no
obstacles at the cord passage before
installing the main switch box. When
the cord is excessively long, adjust
the length by hauling the cord inside
the upper motor cover.
33
INSTALLATION
3