TOHATSU M 60C Owner's Manual page 75

Cleaning Engine Oil Line
Oil filter and oil tank. Check the oil tank
and/or filter for entrapped water and
dust.
1 Disconnect all pipes between the oil
tank and oil pump.
2 Clean out foreign matter.
3 Refit the pipes to the oil tank and
pumps, and then fill up with new
engine oil.
4 For air purging, refer to Item No. 5:
Fuel and Engine Oil.
INSPECTION AND MAINTENANCE
Replacing gear oil
�������
!
• Be sure that outboard motor is
secured to transom or service
stand, or accidental drop or fall
of outboard motor could lead to
severe personal injury.
• Be sure to lock outboard motor
if it is tilted up, or accidental fall
of outboard motor could lead to
severe personal injury.
• Do not go under outboard motor
tilted up and locked, or accidental
fall of outboard motor could lead
to severe personal injury.
1 Remove the oil plugs (upper and
lower), and completely drain the
gear oil into a pan.
2 Insert the oil tube nozzle into the
lower oil plug hole, and fill with gear
oil by squeezing the oil tube until oil
flows out of the upper plug hole.
75
10