Daily Inspection - TOHATSU M 60C Owner's Manual

Hide thumbs Also See for M 60C:
Table of Contents

Advertisement

1. Daily inspection

Perform the following checks before
and after use.
Item
• Check the amount of fuel in the tank.
Fuel System
• Check for dust or water in the fuel filter.
• Check rubber pipes for oil leakage.
• Check the amount of engine oil in the oil tank.
Lubrication
System
• Check for dust or water in the oil filters.
• Check the spark plugs for dirt, wear and carbon built-up.
Spark plugs : NGK BR-8HS-10 (1.0mm gap) (0.0394 in)
• Check if the main switch functions normalty.
• Check if the battery electrolyte level and specific gravity are
Electrical
normal
Equipment
• Check for loose connections on battery terminal.
• Check if the stop switch functions normally and make sure
the lock plate is present.
• Check cords for loose connections and damage.
• Check that the choke solenoid and valve for the carburetor
works normally.
Throttle System
• Check if the carburetor and magneto work normally when
turning the throttle grip, and also check links for looseness.
• Check if the clutch engages correctly when operating the
Remote Control. (or Shift lever)
Clutch and
Propeller
• Check the propeller for bent or damaged blades.
System
• Check if the propeller nut is tightened and the split pin is
present.
• Check all the motor installation bolts with the boat.
Installation of
Motor
• Check the thrust rod installation.
Power Trim & Tilt • Check working of the tilt up and down of the motor.
• Check that cooling water is discharged from the cooling
Cooling Water
water check port after the engine has started.
• To be prepare tools and spare parts for replacing spark
plugs, propeller, etc.
Tools and Spares
• Check if the spare rope is provided.
Steering Devices
• Check working of steering handle and remote control.
• Check if the anode and trim tab are securely installed.
Other Parts
• Check the anode and trim tab for corrosion and deformation.
INSPECTION AND MAINTENANCE
!
Do not use outboard motor if any
abnormality is found during pre-
operation check or it could result in
severe damage to the motor or severe
personal injury.
Points to Check
�������
Action
Replenish
Clean
Replace
Replenish
Clean
Clean or replace
Remedy or replace
Replenish or
recharge
Retighten
Remedy or replace
Correct or replace
Replace
Correct
Adjust
Replace
Tighten
Tighten
Repair if necessary
Replace
69
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 70cx

Table of Contents