TOHATSU M 60C Owner's Manual page 28

28
INSTALLATION
120A2, 140A2
1 Install the multi-purpose meter
securely in the dashboard where the
instrument can be easily read and is
not exposed to water splashes. The
recommended dashboard thickness
is 2 – 11 mm (0.08 – 0.43 in). For
dashboards thicker than 11 mm (0.43
in), the fitting plate should be cut
3
accordingly. Be sure to tighten the
fitting nuts on the fitting plate evenly.
The dashboard inclination should be
50˚ – 80˚.
Dashboard
2 Cut a hole 85.5 mm (3.37 in) in
diameter for the multi-purpose meter.
Fitting plate
Fitting nut
50º – 80º
(3.37 in)
85.5 mm
3 Set the selector knob at the back of
the meter to "12P".
Selector
knob