Installing The Remote Control Devices - TOHATSU M 25H Owner's Manual

2. Installing the remote control devices

It is recommended that you consult
w i t h y o u r a u t h o r i z e d d e a l e r f o r
installation adjustment of the remote
control device.
�������
!
When using other than Tohatsu's genuine
remote control box, DO NOT select the
one without neutral safety switch that
prevents in-gear start.
Use of remote control box without
neutral safety switch can allow start of
engine with gear at other than neutral
shift, potentially leading passengers to
falling or causing passenger to be thrown
overboard.
■ Installation of the Remote Control
Cables (Box side) :
F o l l o w t h e i n s t r u ct i on m a nu a l
provided with the remote control.
■ Installation of the Remote Control
on your boat :
F o l l o w t h e i n s t r u ct i on m a nu a l
provided with the remote control.
■ Installation of the Remote Control
Cable (engine side) and the Cord
Assembly (Wiring Harness) :
25H EP/30H EP
1 Fitting of holder cap and sleeve B
guide
Throttle side......Fit the holder cap
to the end of the cable and fix it
by the nut.
Holder
cap
Spring
Ball Washer
holder
Nut
Throttle cable
Shift side......Fit the sleeve B guide
to the end of the cable and fix it
by the nut.
Sleeve B guide
Lock pin
Nut
Spring
Spring pin Shift cable
21
INSTALLATION
Cable outer
groove
Cable outer
groove
3