TOHATSU M 60C Owner's Manual page 55

�������
!
The Power Trim & Tilt can be set to
any trim angle, however, avoid cruising
with the outboard motor tilted in the
tilt range. Operating the boat in this
manner, the outboard motor may ingest
air into the water cooling system,
resulting in engine overheating.
■ How to use the trim meter
When the trim angle is set as
desired, take a reading off the
trim meter, and record it for future
reference.
76˚
■ Improper Trim Angle (bow rises too
high)
If the trim angle is excessive, the
bow will rise out of the water and
the speed will decrease.
Furthermore, the bow may sway
or the bottom may slam the water
while cruising.
Trim angle
adjustment
range
8˚
24˚
ENGINE OPERATION
In this case, decrease the trim
angle by pressing the switch on the
Remote control level to "DN".
120A2 • 140A2
Down
■ Improper Trim Angle (bow dips into
the water)
If the trim angle is too small, the
bow will dip into the water, the
speed will decrease, and water may
enter the boat.
In this case, the trim angle should
be increased by pressing the switch
on the remote control lever to "UP".
120A2 • 140A2
Up
55
60C • 70C • 90A2
60C • 70C • 90A2
5