Propeller Selection; Installing The Remote Control Devices - TOHATSU M 40D2 Owner's Manual

2. Propeller Selection

A propeller must be selected so that
the engine rpm measured at wide open
throttle while cruising is within the max.
operating range;
40D2 : 5,000 to 5,700 rpm
50D2 : 5,150 to 5,850 rpm
F o r g e n u i n e p r o p e l l e r s , r e f e r t o
Propeller Table of this manual.

3. Installing the remote control devices

�������
!
When using other than Tohatsu's genuine
remote control box, DO NOT select the
one without neutral safety switch that
prevents in-gear start.
Use of remote control box without neutral
safety switch can allow start of engine with
gear at other than neutral shift, potentially
leading passengers to falling or causing
passenger to be thrown overboard.
It is recommended that you consult
w i t h y o u r a u t h o r i z e d d e a l e r f o r
installation adjustment of the remote
control device.
■ Installation of the Remote Control
Cables (Box side) :
Follow the instruction manual provided
with the remote control box.
■ Installation of the Remote Control
Box on your boat :
Follow the instruction manual provided
with the remote control box.
■ Connecting the Remote Control
Cable to the engine :
1 Detach the top cowl by turning the
lever.
23
INSTALLATION
3