To Set A Paper Size In Metric Measurements; To Set A Non-Standard (Custom) Paper Size - Kyocera KM-C2030 Operation Manual

3

To set a paper size in metric measurements

1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Metric].
The Input screen appears with paper sizes in metric measurements.
4
Select the setting for
the size of paper that is
loaded.
5
Touch [Enter].
The paper size for the
1st drawer is set.

To set a non-standard (custom) paper size

✔ If non-standard-sized paper is loaded, it will be necessary to enter the paper
size.
1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Custom Size].
The Custom Size screen appears.
4
Make sure that
is selected.
5
Touch and
to select the
length of side X for the
paper that is loaded.
❍ Touch
the cursor moves
below the fraction that you wish to change.
The entered length of side X appears.
3-14
until
3.5 Loading Paper