Call Settings - Toshiba IP5000 Series User Manual

IPedge
IPMobility Application

Call Settings

Phone Number
Direct Inward Dialing
Number (DID)
Dial using Callback
Dial using Call-thru
Use IPMobility to call
(Android ONLY)
Do not use IPMobility
to call (Android ONLY)
Ask Every Call
(Android ONLY)
104
greeting. (See "Mailbox Setup Wizard"
This is the telephone number of the mobile device. This is also the number that is
used when using the "Make Call" feature.
This is a specially assigned Direct Inward Dialing number that the Call-thru
feature uses to access IPedge phone services. See your system administrator for
this telephone number.
Select this option to have the IPedge system call the mobile device first, ask for
confirmation by pressing 1 or #, then dial the destination number.
Select this option to have the mobile device call the destination number using the
IPedge system without user confirmation.
Call-thru Send Mailbox
Use this function with the Call-thru feature, only if Calling Party
Note:
Identification is NOT being sent from your mobile device or is
unsupported by the service provider for the IPedge.
Select this option if you want IPMobility to always intercept outbound dialing and
route through IPedge.
Select this option if you never want IPMobility to be used exclusively for outbound
dialing.
Select this option if you wish to have the IPMobility Application display a
notification that it should be used for every call.
TOSHIBA
on Page -89)
IPedge UG 01/13