Toshiba IP5000 Series User Manual page 61

Answering a Page
Group Page
All Call Page
SIP terminals as
paged device
Set SIP Station for
Paging
IPedge UG 01/13
groups. Verify with your system administrator if there are sufficient vacant media
resources for successful paging.
To make a Page announcement to telephones:
1. Lift the handset, press your extension button and enter a paging access code.
2. Make your announcement, then hang up.
To make a Group Page
Press Group Page and enter the Group number (01~24)
•
— or —
Press extension + #31 and enter the zone number.
•
To answer a page from the paged station, press the page button - do not lift the
handset or press the speaker button. To answer a page from other stations
perform a Directed Terminal Pick up (See Call Pick up). The call must be picked
up before paging ends. When the page is answered, the device being used at that
time will be released.
If a paged station is a member of two paging groups, and is being paged as a
member of one group, and a page is attempted for the second group, that
telephone attempting the page on the second group will receive a busy signal.
The original paging is maintained, except in the case where the second page is
Emergency Paging.
To answer a Group Page, lift the handset off-hook, dial #5#36 and enter the
Page Zone number (01~08, depending on your telephone system).
You can make an All Call Page to telephones assigned to the "All Call Page
Group." Stations are assigned to the "All Call Page Group" in system
programming.
To make an All Call Page:
1. With the handset off-hook, press All Call Page
— or —
Dial #30. This pages all telephones in the All Call Page Group, not the
external speakers. Paging external speakers requires a separate action.
2. Announce the page and hang up the handset.
SIP stations may be set as a paged device, provided they support this feature.
IPedge will disconnect the terminating call and drop SIP terminal from the list of
paging group if SIP terminal returns busy or busy no answer at terminating.
To answer the paged call, the user will seize a different line and enter the feature
access code. To originate a page, enter the paging access code.
Certain SIP terminals may accept a paged call if the phone supports paging, and
the feature is enabled. IPTs belonging to the same group will also hear the paging
call.
TOSHIBA
IPedge
Feature Operations
57