Main Screen; Calls Display Area - Toshiba IP5000 Series User Manual

IPedge
Using Companion Applications

Main Screen

Calls Display Area

244
Fly out/Fly in button – is used dock the window back to the main screen
•
of Call Manager or if its already docked to hide it 'inside' the main screen.
Setup – Brings up the Dialer configuration screen.
•
Reset button – Puts Dialer back to its initial state.
•
Enabled Check box – This is the Check box in the toolbar. This box
•
indicates whether the dialer is enabled. This allows the user to easily
Enable (Start) or Disable (Stop) the entire dialer function. For example, if
you need to take a break to do some paperwork, you could simply disable
the power dialer until you're ready to start making calls again.
Add Call – Click the Add Call button to place a dialer call. The AddDialer
•
box displays.
Phone Status – this shows whether the phone is idle, busy, in Do-Not-
•
Disturb, etc.
Calls Display Area – this area shows the list of calls that have been
•
placed or have yet to be placed (details below).
Column Headers – these show what information is contained in each
•
column. Using your mouse, you can resize and reposition these headers
to customize your viewing area.
This area shows each call that is either (1) yet to be placed or (2) that has
already been completed. The available columns include:
Date – this column shows the date the call is to be placed or when the call
•
was completed.
Time – this column shows the time the call is to be placed or was
•
completed.
Status – the status of the call. If this is blank the call is not due yet. Other
•
status values include:
• Due Now – The time has arrived for this call to be placed.
• Overdue – This call has not yet been placed and it is overdue.
• Done – This call has been completed.
TOSHIBA
IPedge UG 01/13