Toshiba IP5000 Series User Manual page 111

Callback
Call-thru
IPedge UG 01/13
To use the Callback feature:
1. Select the [Call] tab.
Android handsets may use the default dialer Application and choose to
Note:
complete the action using IPMobility; Apple iOS phones do not support
this feature.
2. When Call screen opens, enter destination number or select a number from
the address book and press dial.
The following call flow example assumes that "Ask Every Call" was set
1. A popup screen will display the option to use IPMobility or the phone for
dialing.
2. Select IPMobility.
3. After a few seconds the mobile device will receive a call back from the host
IPedge system.
4. When the incoming call is answered, IPedge will automatically dial the
destination number.
5. Once the call is connected the same options are available as "Call Screening"
(press the IPMobility notification in the notification bar to access if not
displayed.)
To use the Call-thru feature:
1. Select the [Call] tab
Android handsets may use the default dialer Application and choose to
Note:
complete the action using IPMobility; Apple iOS phones do not support
this feature.
2. Enter a destination number on the call screen or select a number from your
address book and press dial.
The following call flow example assumes that "Ask Every Call" was set.
1. A popup screen is presented asking whether to use IPMobility or the phone
for out dial
TOSHIBA
IPedge
IPMobility Application
107