Speed Dial; System Speed Dial; System Info; Display Advisory Messages - Toshiba IP5000 Series User Manual

IPedge
IPedge Enterprise Manager
Table 13: Call Forward Direct Line Calls (continued)
F
IELD
CF Direct Line Calls – CF
Busy or No Answer to

Speed Dial

System Speed Dial

System Info

Display Advisory
Messages
314
D
ESCRIPTION
When Call Forward Busy or No Answer is activated on your telephone and your
telephone receives an internal call or incoming line call the following call forward
operation occurs:
If your telephone is busy on an existing call, new calls to your direct line telephone
number will not ring your telephone; all new direct line calls will be sent directly to
the CF Busy or No Answer destination.
If your telephone is idle, your telephone will ring; if the direct line call is not answered
within a predetermined amount of time, the call will be sent to the CF Busy or No
Answer destination. The amount of time your telephone will ring before it forwards is
the amount of time set in the Ring No Answer timer.
Notes:
1. Internal calls will not forward to the direct line destination. Internal calls only
forward to the "Internal Call and Line Call" destinations.
2. Your telephone may forward even if you do not activate Call Forward; this is
because your system administrator has activated System Call Forward on your
telephone.
Your telephone must have Station Speed Dial numbers enabled by your
System Administrator to provide the Station Speed Dial feature. You can have
a maximum of 100 Station Speed Dial Numbers (up to 32 digits each)
assigned to each station. Only the Speed Dial numbers that are assigned to
you by your System Administrator appear on this screen.
1. Select Speed Dial tab.The Station Speed Dial screen displays.
2. Select the row/number to program.
Hover over the bubbles located above the parameters to read the
Note:
flyover text for information to be entered in each field.
3. Click the Save button.
All telephones in your system can share a list of up to 800 System Speed Dial
numbers under the exclusive control of the System Administrator. In some
cases, System Speed Dial enables you to reach numbers that you would not
be allowed to dial directly from your telephone. System speed dial is a view
only screen.
This is a view only screen.
Advisory messaging enables you to store an informative message for LCD
telephones that call your telephone. This is view only under System Info.
TOSHIBA
IPedge UG 01/13