IPedge
Feature Operations
Call History
View Call History
Call Park
Park a Call
44
22. Call Forward Pass code for other telephone 1111
23. Enter # for an outside destination number
24. Outside Line Access Code (e.g. 9)
25. Enter outside telephone number 1-949-555-0000
26. Enter ring time in seconds (e.g. 08) before call forwards
Incoming calls with Caller ID or ANI information can be optionally recorded
into a rolling list for the station where the call is ringing. The call is placed in
the list along with the number, name (if provided), time and date of the call,
and status of the call (answered, abandoned, or redirected). You can access
this list from an LCD telephone with a flexible Caller ID button.
When your station is idle, press the Caller ID button. The Caller ID LED
•
lights green and the latest record displays.
▲
Press Vol +
for the next record; press Vol +
•
record.
To view the call date, time, and status, press SK2 (press again to toggle
•
to call name/number).
The Call Park feature enables you to hold a call temporarily in a location other
than your telephone. These areas are called orbits. You or another telephone
user can retrieve a parked call from its orbit by specifying the orbit number.
You can specify one of 20 General Park Orbits (7000~7019) or a valid
extension number within the system.
Once you have parked a call in an orbit, you can:
Hang up and retrieve the parked call at a later time.
•
Originate another call.
•
Access a voice paging device to announce the parked call for pickup from
•
another station.
If you park a call and it is not retrieved, it will recall to the parking station and
one of the following occurs:
If your station is idle when the system Call Park recall timer expires, the
•
parked call automatically recalls to your station.
If your station is busy, the parked call camps on.
•
If you have an LCD telephone, you can let the system automatically select an
available orbit number which displays on your LCD.
1. While on a call, press Park in Orbit or press Cnf/Trn + #33. The LED
flashes green (consultation-hold). If you were on an extension during the
call, and you have line button on your telephone, the line LED will flash
until the call is picked up (depending on programming).
2. Specify the Park Orbit using one of the following:
TOSHIBA
▼
for the previous
IPedge UG 01/13